Robust Adaptive Diagonal Variable Loading RLS Beamforming
نویسنده
چکیده
This paper deals with diagonal variable loading recursive least squares (VLRLS) array beamforming based on a generalized sidelobe canceller. In conjunction with a subweight partition approach, the VLRLS-based beamformer demonstrates the advantages of fast convergence speed, insensitivity to dynamic estimate modeling error, less computational load, and more robust to against pointing errors and imperfect arrays compared to the conventional VLRLS and RLS-based beamformers. Several computer simulation examples are provided for illustrating the effectiveness of the proposed method.
منابع مشابه
Near-Field Robust Adaptive Beamforming Based on Worst-Case Performance Optimization
The performance of adaptive beamforming degrades substantially in the presence of steering vector mismatches. This degradation is especially severe in the near-field, for the 3-dimensional source location is more difficult to estimate than the 2-dimensional direction of arrival in far-field cases. As a solution, a novel approach of near-field robust adaptive beamforming (RABF) is proposed in th...
متن کاملNear-Field Robust Adaptive Beamforming Based on Worst-Case Performance Optimization
The performance of adaptive beamforming degrades substantially in the presence of steering vector mismatches. This degradation is especially severe in the near-field, for the 3-dimensional source location is more difficult to estimate than the 2-dimensional direction of arrival in far-field cases. As a solution, a novel approach of near-field robust adaptive beamforming (RABF) is proposed in th...
متن کاملA recursive least squares implementation for LCMP beamforming under quadratic constraint
Quadratic constraints on the weight vector of an adaptive linearly constrained minimum power (LCMP) beamformer can improve robustness to pointing errors and to random perturbations in sensor parameters. In this paper, we propose a technique for implementing a quadratic inequality constraint with recursive least squares (RLS) updating. A variable diagonal loading term is added at each step, wher...
متن کاملAdaptive Beamforming for Sonar Audio
Sonar audio is a major tool used by sonar operators to assist in classifying acoustic contacts. In this paper we discuss some issues that arise when adaptive beamforming is used for sonar audio. Frequency domain beamforming is used to reduce computational cost, and diagonal loading of the cross-spectral matrix is used to obtain the best quality output. The effectiveness of a robust Capon beamfo...
متن کاملRobust Adaptive Beamformers Using Diagonal Loading
Diagonal loading imparts Robustness to the adaptive beamformer against signal mismatch due to low sample support. It helps to achieve desired sidelobe level and to improve Signal to Interference plus Noise Ratio (SINR). In this paper, variants of Minimum Variance Distortionless Response-Sample Matrix Inversion (MVDR-SMI) beamformer with diagonal loading are analyzed. A novel hybrid algorithm, M...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012