Numerical Study of Heterogeneous Reactions in an SOFC Anode with Oxygen Addition

نویسندگان

  • Yong Hao
  • David G. Goodwin
چکیده

Previous experimental studies have shown that addition of small amounts of oxygen to a hydrocarbon fuel stream can control coking in the anode, while relatively large amounts of oxygen are present in the fuel stream in single-chamber solid oxide fuel cells SOFCs . In order to rationally design an anode for such use, it is important to understand the coupled catalytic oxidation/ reforming chemistry and diffusion within the anode under SOFC operating conditions. In this study, the heterogeneous catalytic reactions in the anode of an anode-supported SOFC running on methane fuel with added oxygen are numerically investigated using a model that accounts for catalytic chemistry, porous media transport, and electrochemistry at the anode/electrolyte interface. Using an experimentally validated heterogeneous reaction mechanism for methane partial oxidation and reforming on nickel, we identify three distinct reaction zones at different depths within the anode: a thin outer layer in which oxygen is nearly fully consumed in oxidizing methane and hydrogen, followed by a reforming region, and then a water–gas shift region deep within the anode. Both single-chamber and dual-chamber SOFC anodes are explored. © 2008 The Electrochemical Society. DOI: 10.1149/1.2907763 All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Numerical analysis of an anode-supported high temperature DIR-PSOFC operating conditions with considering the maximum allowable temperature difference

In the present study, the operating conditions of an anode-supported high temperature direct internal reforming (DIR) planar solid oxide fuel cell (SOFC) are numerically analyzed. SOFCs are the energy conversion devices that produce electricity and heat directly from a gaseous fuel by the electrochemical combination of that fuel with an oxidant. A planar SOFC consists of an interconnect structu...

متن کامل

A New Numerical Study Method of Thermal Stress Distribution and Tortuosity Effectiveness in an Anode Porous Electrode for a Planar Solid Oxide Fuel Cell

A fuel cell is an electro-chemical tool capable of converting chemical energy into electricity. High operating temperature of solid oxide fuel cell, between 700oC to 1000oC, causes thermal stress. Thermal stress causes gas escape, structure variability and cease operation of the SOFC before its lifetime.The purpose of the current paper is to present a method that predicts ...

متن کامل

Theoretical and Experimental Study of Solid Oxide Fuel Cell (SOFC) Using Impedance Spectra

Solid oxide fuel cell (SOFC) is a promising alternative energy source, with its advantages of high operating efficiency, fuel flexibility, low emissions and relatively low cost. However, there are several challenges concerning the SOFC research. Little is known about the complex interfacial electrochemistry and thermochemistry, and it is also difficult to diagnose problems and optimize cell per...

متن کامل

Interface Analysis of Complex Oxide Ceramics in Electrolyte Supported Solid Oxide Fuel Cell

Solid Oxide Fuel Cells (SOFC) offer electrochemically generated sources of electricity using oxygen ion transport at elevated temperatures. Analysis of materials used in SOFC using electron microscopy provides insights of foreseeable chemical reactions that govern the performance of the fuel cell. Materials used in SOFC can be divided into four categories; anode, cathode, electrolyte and interc...

متن کامل

The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell

Using flawless components are important for a proper material selection and best working conditions to achieve the best performance of solid oxide fuel cells (SOFCs). Tape casting is the most used process for the fabrication of SOFC parts, especially anode and electrolyte due to its advantages regarding the other processes. In this study, the effect of slurry composition and milling time were s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008