Properties of Cu(In,Ga) Se2 Thin Films and Solar Cells Deposited by Hybrid Process
نویسندگان
چکیده
This Article is brought to you for free and open access by the Electrical & Computer Engineering at ODU Digital Commons. It has been accepted for inclusion in Electrical & Computer Engineering Faculty Publications by an authorized administrator of ODU Digital Commons. For more information, please contact [email protected]. Repository Citation Marsillac, S.; Khatri, H.; Aryal, K.; and Collins, R. W., "Properties of Cu(In,Ga) Se2 Thin Films and Solar Cells Deposited by Hybrid Process" (2012). Electrical & Computer Engineering Faculty Publications. Paper 1. http://digitalcommons.odu.edu/ece_fac_pubs/1
منابع مشابه
Fabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process
Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...
متن کاملEffect of Annealing on Physical Properties of Cu2ZnSnS4 (CZTS) Thin Films for Solar Cell Applications
Cu2ZnSnS4 (CZTS) thin films were prepared by directly sputteringCu (In,Ga)Se2 quaternary target consisting of (Cu: 25%, Zn: 12.5%, Sn; 12.5%and S: 50%). The composition and structure of CZTS layers have beeninvestigated after annealing at 200 0C, 350 0C and 500 0C under vacuum. Theresults show that recrystallization of the CZTS thin film occurs and increasingthe grain size with a preferred orie...
متن کاملOne-Step Electrodeposited Cu-In-Ga Thin Films and Cu(In,Ga)Se2 Absorber Synthesis for Solar Cells
Cu-In-Ga electrodeposition on Mo substrate is carried out in acidic aqueous media. Subsequent selenization leads to Cu(In,Ga)Se2 absorber for thin film solar cells. First, conditions to achieve onestep Cu-In-Ga electrodeposition are analysed. Then, Cu-In and CuGa systems are studied. Cu-In electrodeposition is realized under diffusion-control conditions. For Cu-Ga system, first Cu(II) diffusion...
متن کاملChemical Bath Deposited CdS for CdTe and Cu(In,Ga)Se2 Thin Film Solar Cells Processing
Extensive research has been done during the last two decades on cadmium sulfide (CdS) thin films, mainly due to their application to large area electronic devices such as thin film field-effect transistors (Schon et al., 2001) and solar cells (Romeo et al., 2004). For the latter case, chemical bath deposited (CBD) CdS thin films have been used extensively in the processing of CdTe and Cu(In,Ga)...
متن کاملDelft University of Technology Quenching Mo optical losses in CIGS solar cells by a point contacted dual-layer dielectric spacer A 3-D optical study
A 3-D optical modelling was calibrated to calculate the light absorption and the total reflection of fabricated CIGS solar cells. Absorption losses at molybdenum (Mo) / CIGS interface were explained in terms of plasmonic waves. To quench these losses, we assumed the insertion of a lossless dielectric spacer between Mo and CIGS, whose optical properties were varied. We show that such a spacer wi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016