Improvements of the Set-up and Procedures for Beam Energy Measurements at Bessy Ii*

نویسندگان

  • P. Kuske
  • R. Goergen
  • J. Kuszynski
  • P. Schmid
چکیده

With a 7 T wiggler in operation all attempts to detect the resonant depolarization of the electron spins were unsuccessful at BESSY II. This was attributed to the severely reduced degree of spin polarization of the electrons moving in the alternating fields of the strong wiggler which on the other hand nearly doubles the radiation loss per turn. The key to a clear detection of the depolarization is the improvement of the sensitivity of the polarimeter, based on the spin dependent Touschek scattering cross section and the more effective and thus full depolarization of the beam. With these improvements the high precision beam energy determination can again be performed in parallel to the normal user operation and without any noticeable perturbations to the beam.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Medium-Term Stability of the Photon Beam Energy of An Elekta CompactTM Linear Accelerator Based on Daily Measurements of Beam Quality Factor

Introduction In this study, we aimed to assess the medium-term energy stability of a 6MV Elekta CompactTM linear accelerator. To the best of our knowledge, this is the first published article to evaluate this linear accelerator in terms of energy stability. As well as investigating the stability of the linear accelerator energy over a period of several weeks, the results will be useful for esti...

متن کامل

Bunch-by-bunch Feedback and Diagnostics at Bessy Ii

At the light source BESSY II new digital bunch-bybunch feedback systems [1] have been put into operation in January 2013, replacing the existing analog as well as the obsolete digital systems. From the first days of operation the new system successfully suppresses transverse and longitudinal beam instabilities in wide range of machine parameters. The system offers also many new diagnostics oppo...

متن کامل

Measurements of output factors using different ionization chambers and build up caps

Background: The aim of this work was to study the output factors for Linac using different ionization chambers and build up caps. Materials and Methods: Output factors were measured for open square fields (3 × 3 cm to 40 × 40 cm) defined by collimator jaws for 6 and 15 MV photon beams from a Varian Clinac 2100C accelerator were measured. The measurements in air were performed using Com...

متن کامل

The effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers

HDPE monofilaments were obtained using different extruders and drawn by post-extruder equipments. After solidification, drawn and undrawn monofilaments (draw ratio 7:1) were irradiated with 10 MeV electron beams in air at room temperature at 25, 50, 75, 100 and 125 kGy dose ranges to induce a network structure. HDPE crosslinking was studied on the basis of gel content measurements. The fibers w...

متن کامل

Photon Dosimetry Quality Audit of Radiotherapy Centers in Iran: SSDL's On-Site Visit Program During 2007-2017

Introduction: A dosimetric audit is a quality assurance process (QA) that allows the accuracy of dosimetric and geometric precision to accurately control the delivery of doses. They can be used to evaluate the accuracy of radiation delivery at different radiotherapy centers. Differences in prescriptive doses, depending on the severity of the differences, have potential conseque...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010