Preparation and dispersion of Ni–Cu composite nanoparticles
نویسندگان
چکیده
Finely dispersed sandwich composite nanoparticles of Cu–Ni–Cu were prepared by a novel method combining template synthesis and an ultrasonic treatment method. The composite nanoparticles have uniform cylinder shape with tunable diameter and length. Transmission electron microscopy (TEM) and electron diffraction (ED) were employed to characterize the nanoparticles. This method can be used to fabricate shapeand sizecontrolled composite nanoparticles in a wide range of metals and other materials. The so-prepared particles may be suitable candidates as nanoscale blocks for assembling nanodevices.
منابع مشابه
Polymerized-complex method for preparation of supported bimetallic alloy and monometallic nanoparticles.
Herein, we report a novel polymerized-complex method for the preparation of Ni-Pd, Ni-Pt, and Cu-Pt alloys and Pt, Pd, Ag, Ni, and Cu nanoparticles. The grain sizes and crystalline phases of these nanoparticles can be controlled. These nanoparticles are obtained via the formation of a polymerized complex and release of reducing gases during N2-protected calcination.
متن کاملOxidation Behaviour of Ni-Cr-Y2O3 Composite Coatings Synthesised by Sol Enhanced Pulse Electroplating
The objective of this study was to improve the oxidation resistance of electroplated Ni-Cr coatings by introducing a fine dispersion of yttria (Y2O3) nanoparticles to the coatings. A technique was developed to produce Y2O3 nanoparticles nm in size. Electroplating conditions were also investigated and it was found that pulse plating could produce high quality coatings without cracking. The Y2O3 ...
متن کاملMechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite
In this study, the elemental powders of aluminum and copper were initially subjected to mechanical alloying using an attrition ball mill under argon atmosphere to produce an Al-4.5 wt% Cu powder alloy. The WC nanoparticles were then added to the powder alloy and milled in a planetary ball mill to explore the role of the WC nanoparticles on the mechanical properties of the fabricated composite p...
متن کاملReforming of Biogas over Co- and Cu-Promoted Ni/Al2O3-ZrO2 Nanocatalysts Synthesized via Sequential Impregnation Method
Utilization of active and stable catalyst could have enormous advantages in industrial application of biogas reforming. In order to achieve this goal, the effects of Cu and Co as promoters were investigated over physical-chemical properties of Ni/Al2O3-ZrO2 catalyst in reforming of biogas. The sequential impregnation was used for preparation of catalysts. The catalysts were characterized using ...
متن کاملSynthesis of new dental nanocomposite with glass nanoparticles
Objective(s): The aim of this study was to synthesis new dental nanocomposites reinforced with fabricated glass nanoparticles and compare two methods for fabrication and investigate the effect of this filler on mechanical properties. Materials and Methods: The glass nanoparticles were produced by wet milling process. The particle size and shape was achieved using PSA and SEM. Glass nanoparticle...
متن کامل