Winding type influence on efficiency of an induction motor

نویسندگان

  • Miralem HADŽISELIMOVIĆ
  • Tine MARČIČ
  • Bojan ŠTUMBERGER
  • Ivan ZAGRADIŠNIK
چکیده

The article presents an analysis of the winding type influence on the efficiency of an induction motor. The aim of this work is to choose such a type of stator winding that the induction motor will have the best efficiency by employing minimum winding (copper) mass. Three types of stator windings were considered in the analysis: concentric single layer winding, concentric double layer winding and fractional concentric winding. The complete procedure for the calculation of winding data is performed. The analytical calculations of electromagnetic characteristics were performed with the software package emLook in order to select the best suited winding type and consequently ensuring the best efficiency and performance of the induction motor in question. The presented results are applicable for the industry of electric machines. Streszczenie. Artykuł przedstawia analizę wpływu typu uzwojenia ja sprawność silnika indukcyjnego. Celem pracy jest wybór takiego typu uzwojenia stojana, które zapewni maksymalną sprawność przy minimalnej masie uzwojenia. Trzy typy uzwojeń stojana zostały rozpatrzone: uzwojenie koncentryczne jednowarstwowe, dwuwarstwowe oraz uzwojenie koncentryczne ułamkowe. Przedstawiono procedurę obliczania danych uzwojenia. Do wyznaczenia charakterystyki elektromagnetycznej wykorzystano obliczenia analityczne z pakietem emLook. Wyselekcjonowano najlepszy typ uzwojenia, zapewniający najlepszą sprawność działania rozważanego silnika indukcyjnego. Przedstawione wyniki zostały implementowane w rozwiązaniach przemysłowych. (Wpływ typu uzwojenia na sprawność silnika indukcyjnego)

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Increasing the Efficiency of the Power Electronic Converter for a Proposed Dual Stator Winding Squirrel-Cage Induction Motor Drive Using a Five-Leg Inverter at Low Speeds

A dual stator winding squirrel-cage induction motor (DSWIM) is a brushless single-frame induction motor that contains a stator with two isolated three-phase windings wound with dissimilar numbers of poles. Each stator winding is fed by an independent three-phase inverter. The appropriate efficiency of this motor is obtained when the ratio of two frequencies feeding the machine is equal to the r...

متن کامل

Design of an Active Approach for Detection, Estimation and Short-Circuit Stator Fault Tolerant Control in Induction Motors

Three phase induction motors have many applications in industries. Consequently, detecting and estimating the fault and compensate it in a way that the faulty induction motor satisfies the predefined goals are important issues. One of the most common faults in induction motors is the short circuit of the stator winding. In this paper, an active fault-tolerant control system is designed and pres...

متن کامل

Improvement of Electromagnetic Forces in a Single-Phase Induction Motor by Providing a New Winding Distribution

Single-phase induction motors have a wide range of domestic and industrial applications. These motors have a squirrel cage rotor and their stator usually has two windings: main and auxiliary. The use of auxiliary winding in the structure of single-phase induction motors creates two unbalance and asymmetric phases. This causes to increase the spatial harmonics of the field in the air gap, and al...

متن کامل

Magnetic Saturation Impacts on Fault Analysis of Squirrel-Cage Induction Motors using Winding Function Approach

Multiple coupled circuit modeling of squirrel-cage induction motors, or winding function approach is the most detailed and complete analytical model used to analyze the performance of the faulty induction motors. This paper extends the above-mentioned model to a saturable model including variable degrees of the saturation effects using an appropriate air gap function and novel techniques for lo...

متن کامل

Stator Fault Detection in Induction Machines by Parameter Estimation Using Adaptive Kalman Filter

This paper presents a parametric low differential order model, suitable for mathematically analysis for Induction Machines with faulty stator. An adaptive Kalman filter is proposed for recursively estimating the states and parameters of continuous–time model with discrete measurements for fault detection ends. Typical motor faults as interturn short circuit and increased winding resistance ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011