Beam Dynamics Studies for a Ctf3 Proposed Injector*
نویسندگان
چکیده
A CTF3 drive beam injector for the nominal stage is proposed, which includes thermionic DC gun, three SubHarmonic Bunchers (SHBs), one prebuncher, one 6-cell travelling wave buncher and two accelerating structures. Its beam dynamics is simulated by PARMELA. It is shown that all important parameters, e.g. satellite charge, bunch length and normalized transverse emittance can be met with the design goals if about 400 kW RF power for 3 SHBs is available. In addition, the beam dynamics of the injector for the initial stage has been simulated.
منابع مشابه
An Injector for the CLIC Test Facility (CTF3)
The CLIC Test Facility (CTF3) is an intermediate step to demonstrate the technical feasibility of the key concepts of the new RF power source for CLIC. CTF3 will use electron beams with an energy range adjustable from 170 MeV (3.5 A) to 380 MeV (with low current). The injector is based on a thermionic gun followed by a classical bunching system embedded in a long solenoidal field. As an alterna...
متن کاملBeam Dynamics for the Preliminary Phase of the New Clic Test Facility (ctf3)
In the framework of the CLIC (Compact Linear Collider) RF power source studies, the scheme of electron pulse compression and bunch frequency multiplication, using injection by RF deflectors into an isochronous ring, will be tested, at low charge, during the preliminary phase of the new CLIC Test Facility (CTF3) at CERN. In this paper, we describe the beam dynamics studies made in order to asses...
متن کاملCommissioning Status of the Decelerator Test Beam Line in Ctf3
The CLIC Test Facility (CTF3) at CERN was constructed by the CTF3 collaboration to study the feasibility of the concepts for a compact linear collider. The test beam line (TBL) recently added to the CTF3 machine was designed to study the CLIC decelerator beam dynamics and 12 GHz power production. The beam line consists of a FODO lattice with high precision BPM’s and quadrupoles on movers for pr...
متن کاملDesign Studies for a High Current Bunching System for CLIC Test Facility (CTF3) Drive Beam
A bunching system is proposed for the initial stage of CTF3 which consists of one (two) 3 GHz prebuncher(s) and one 3GHz travelling wave (TW) buncher with variable phase and group velocities. The electron beam is emitted from a 140 KV DC gun. Since the average macropulse beam current (3.5 A) at the exit of the TW buncher is rather high, inside the TW buncher one has to take the beam loading eff...
متن کاملBeam Dynamics Simulation for the Ctf3 Drive-beam Accelerator
A new CLIC Test Facility (CTF3) at CERN will serve to study the drive beam generation for the Compact Linear Collider (CLIC). CTF3 has to accelerate a 3.5A electron beam in almost fully-loaded structures. The pulse contains more than 2000 bunches, one in every second RF bucket, and has a length of more than one μs. Different options for the lattice of the drive-beam accelerator are presented, b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001