Vector Control of Multimotor Drive
نویسندگان
چکیده
Three-phase induction machines are today a standard for industrial electrical drives. Cost, reliability, robustness and maintenance free operation are among the reasons these machines are replacing dc drive systems. The development of power electronics and signal processing systems has eliminated one of the greatest disadvantages of such ac systems, which is the issue of control. With modern techniques of field oriented vector control, the task of variable speed control of induction machines is no longer a disadvantage. The need to increase system performance, particularly when facing limits on the power ratings of power supplies and semiconductors, motivates the use of phase number other than three, In this paper a novel scheme of connecting two, three phase induction motors in parallel fed by two inverters; viz. VSI and CSI and their vector control is presented. Keywords—Field oriented control, multiphase induction motor, power electronics converter.
منابع مشابه
Practical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC
In this paper, using a personal computer (PC), the practical implementation of scalar and vector control methods on a three–phase rotor surface- type permanent magnet synchronous machine drive is discussed. Based on the machine dynamic equations and the above control strategies, two block diagrams are presented first for closed-loop speed controlling of the machine drive/system. Then, the desig...
متن کاملPractical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC
In this paper, using a personal computer (PC), the practical implementation of scalar and vector control methods on a three–phase rotor surface- type permanent magnet synchronous machine drive is discussed. Based on the machine dynamic equations and the above control strategies, two block diagrams are presented first for closed-loop speed controlling of the machine drive/system. Then, the desig...
متن کاملInvestigation of SLIM Dynamic Models Based on Vector Control for Railway Applications
Although, Single-Sided Linear Induction Motor (SLIM) utilization has increased in railway applications due to their numerous advantages in comparison to Rotational Induction Motors (RIM), there are some sophistication in their mathematical models and electrical drive. This paper focuses on the problems of SLIM modeling, with assuming end-effect on the basis of Field Oriented Control (FOC) as a ...
متن کاملTuning of fuzzy controller coefficients in direct torque control with space vector modulator for the three phase induction motors drive using Metaheuristic algorithms with considering electrical faults.
Among all the drive control methods of induction motors, the Direct Torque Control (DTC) method operates independently of the rotor parameters of the machine and, despite its simplicity, provides good torque control in both stable and transient modes. The use of residual comparators in these drives reduces the torque ripple and variable switching frequency. The most common solution is the use o...
متن کاملThe Vector Control of Three-Phase Salient Pole Synchronous Machines Supplied by Pulse-Width- Modulated Voltage Source Inverters
In this paper, computer simulation of a three-phase synchronous motor drive is described. This drive/system is supplied with a new type of pulse-width modulated voltage source inverter (PWM VSI) whose amplitude of the first harmonic, compared to a conventional sinusoidal PWM VSI, is increased by about 17% and whose amplitude of higher harmonics is also reduced inversely proportional to their or...
متن کامل