On modelling heat transfer in chemical microsensors
نویسنده
چکیده
In the present paper heat transfer in a uid is considered. The Oberbeck-Boussinesq equations for stream function and vorticity are solved by a nite diierence method. In the presence of very strong convection puls type solutions occure. The results are applied in the design of microsensors and compared with experimental data.
منابع مشابه
Advance Modelling and Simulation of Industrial Boilers
This paper presents some of the results of the simulation in the radiation section of an industrial boiler using an advanced mathematical model. Calculations are described for the flow, heat transfer, and chemical reaction processes occurring within a gas-fired cylindrical furnace. The calculation procedure is a two dimensional one in which the main hydrodynamic variables are the velocity and s...
متن کاملExperimental Investigation in Pool Boiling Heat Transfer of Pure/Binary Mixtures and Heat Transfer Correlations
Nucleate pool boiling heat transfer coefficient have been experimentally measured on a horizontal rod heater for various liquid binary mixtures. Measurements are based on more than three hundred data points on a wide range of concentrations and heat fluxes. In this investigation, it has been confirmed that the heat transfer coefficient in boiling solutions are regularly less than those in p...
متن کاملImproving Heat Transfer in Falling Film Evaporators in Food Industries
Falling film evaporators, due to their high heat transfer coefficients, low energy loss, rather a low holdup time, and the ability to handle high capacities have broad applications in food industries. Thus, this kind of evaporator is being used in the production of temperature sensitive compounds such as syrups. In this study, through modelling of the falling film evaporator with the use of...
متن کاملHeat Transfer Modelling in Wide Gap Rail Thermite Welding
In the current study, a thermal model was used to investigate the effects of welding parameters on the distribution of temperature in wide gap aluminothermic rail welds. To solve the governing thermal equation, SUTCAST, a finite difference program (FDM) was employed while different aspects such as phase change and convective heat transfer in weld pool were taken into account in the numerical so...
متن کاملNumerical modelling of double-diffusive natural convection within an arc shaped enclosure filled with a porous medium
Numerical study of double-diffusive natural convective heat transfer in a curved cavity filledwith a porous medium has been carried out in the current study. Polar system has beenselected as coordinate system. As a result, all equations have been discredited in r and θdirections. Brinkmann extended Darcy model has been utilized to express fluid flow inporous matrix in the enclosure. Smaller and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1995