A Procedure for Tuning Statcom Parameters for Damping Power System Oscillations
نویسندگان
چکیده
This work investigates the effects of the STATCOM (Static Synchronous Compensator), a FACTS (Flexible AC Transmission Systems) device, on small-signal power system angle stability. This investigation is carried out for a single machine connected to an infinite bus via a loss-less transmission line. The study is based on investigation of the eigenvalues of the linearized power system model in the framework of dynamic bifurcation theory. The tuning method of the STATCOM gains aiming the H2 norm minimization is briefly explained, and the presented simulations results enable an analysis of the effects of this controller for damping power systems low frequency electromechanical oscillations. Copyright © 2005 IFAC
منابع مشابه
FACTS Control Parameters Identification for Enhancement of Power System Stability
The aim of this paper is to investigate a novel approach for output feedback damping controller design ofSTATCOM in order to enhance the damping of power system low frequency oscillations (LFO). The design ofoutput feedback controller is considered as an optimization problem according with the time domain-basedobjective function which is solved by a honey bee mating optimization algorithm (HBMO...
متن کاملA PSO-Based Static Synchronous Compensator Controller for Power System Stability Enhancement
In this paper Power system stability enhancement through static synchronous compensator (STATCOM)based controller is investigated. The potential of the STATCOM supplementary controllers to enhance thedynamic stability is evaluated. The design problem of STATCOM based damping controller is formulatedas an optimization problem according to the eigenvalue based objective function that is solved by...
متن کاملUsing Neural Network to Control STATCOM for ImprovingTransient Stability
FACTS technology has considerable applications in power systems, such as; improving the steady stateperformance, damping the power system oscillations, controlling the power flow, and etc. STATCOM is oneof the most important FACTS devices used in the parallel compensation, enhancing transient stability andetc. Since three phase fault is widespread in power systems, in this paper STATCOM is used...
متن کاملApplication of an Additive Self-tuning Controller for Static Synchronous Series Compensator for Damping of Sub-synchronous Resonance Oscillations
In this paper, an additive self-tuning (ST) control scheme is presented for a static synchronous series compensator (SSSC) to improve performance of conventional PI control system for damping sub-synchronous resonance (SSR) oscillations. The active and reactve series compensation are provided by a three-level 24-pulse SSSC and fixed capacitor. The proposed ST controller consists of a pole shift...
متن کاملImproving the Transient Stability of Power Systems Using STATCOM and Controlling it by Honey Bee Mating Optimization Algorithm
In this study, a new method for designing the damping controller was proposed to improve the transient power system stability in a single machine network connected to an infinite bus. The STATCOM controller problem in a wide area of the system function was considered as an optimization problem with multi-purpose objective function. Also, the Honey Bee Mating Optimization Algorithm was used to d...
متن کامل