Performance Analysis in ACO-OFDM based OWC Systems by Mitigating Clipping Noise
نویسندگان
چکیده
OFDM transmission in optical wireless channel is established via asymmetrically clipped optical OFDM (ACO-OFDM). Clipping is one of the simplest methods to reduce the high peak to average power ratio (PAPR). Clipping leads to additional in-band distortion and out-of band distortion. In this paper it is proposed to mitigate the clipping noise by iterative reconstruction based method and Channel coding method. The out of band distortion is reduced by filtering and in-band distortion by inserting pilot samples. The clipped samples are reconstructed at the receiver and reduce the clipping noise in the presence of AWGN in channel.
منابع مشابه
A novel power-efficient scheme asymmetrically and symmetrically clipping optical (ASCO)-OFDM for IM/DD optical systems
In this paper, we propose a novel scheme of orthogonal frequency division multiplexing (OFDM) for intensity modulation direct detection (IM/DD) optical systems. By using this novel scheme of an OFDM optical system, not only odd subcarriers but also even subcarriers can be modulated to transmit a clipping optical signal. A conventional asymmetrically clipping optical (ACO)-OFDM is applied to mod...
متن کاملMitigating the Clipping Noise by Using the Oversampling Scheme in OFDM Systems
In an Orthogonal Frequency Division Multiplexing (OFDM) systems, the Peak to Average power Ratio (PAR) is high. The clipping signal scheme is a useful and simple method to reduce the PAR. However, it introduces additional noise that degrades the systems performance. We propose an oversampling scheme to deal with the received signal in order to reduce the clipping noise by using finite impulse r...
متن کاملImpulsive Noise Detection and Mitigation in OFDM-based Power-Line Communications
Smart grid can be a solution for reducing greenhouse gas (GHG) emissions. To perform its task, smart grid needs a communication link to communicate between nodes or devices. Using power-line communications (PLC) is beneficial as the power-lines infrastructure has been available. However, in PLC the transmitted signal undergoes multipath channels and impulsive noise corruption. Meanwhile, orthog...
متن کاملComparison of iterative receivers mitigating the clipping noise of OFDM based systems
All systems dealing with the Orthogonal Frequency Division Multiplexing (OFDM) modulation are affected by the major, and well known, drawback of high Peak-to-Average Power Ratio (PAPR). The deliberate amplitude clipping has been found as a suitable way to reduce the output signal level of OFDM transmitters. Unfortunately, it causes numerous degradations and increases the binary error rate of th...
متن کاملEVM and Achievable Data Rate Analysis of Clipped OFDM Signals in Visible Light Communication
Orthogonal frequency division multiplexing (OFDM) has been considered for visible light communication (VLC) thanks to its ability to boost data rates as well as its robustness against frequency-selective fading channels. A major disadvantage of OFDM is the large dynamic range of its time-domain waveforms, making OFDM vulnerable to nonlinearity of light emitting diodes (LEDs). DC biased optical ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012