Osmotic collapse of a void in an elastomer: breathing, buckling and creasing†‡

نویسندگان

  • Shengqiang Cai
  • Katia Bertoldi
  • Huiming Wang
  • Zhigang Suo
چکیده

This paper studies the collapse of a void in an elastomer caused by osmosis. The void is filled with liquid water, while the elastomer is surrounded by unsaturated air. The difference in humidity motivates water molecules to permeate through the elastomer, from inside the void to outside the elastomer, leaving the liquid water inside the void in tension. When the tension is low, the void reduces size but retains the shape, a mode of deformation which we call breathing. When the tension is high, the void changes shape, possibly by two types of instability: buckling and creasing. The critical conditions for both types of instability are calculated. A tubular elastomer collapses by buckling if the wall is thin, but by creasing if the wall is thick. As the tension increases, a thin-walled tube undergoes a buckle-to-crease transition.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultra-Low Cycle Fatigue Fracture Life of a Type of Buckling Restrained Brace

Buckling restrained braced frames (BRBFs) for seismic load resistance have been widely used in recent years. One of the key requirements for a buckling restrained brace is to sustain large plastic deformations under severe ground motions. The core of a buckling restrained brace is prone to fatigue fracture under cyclic loading. The earthquake induced fracture type of the core plate in a bucklin...

متن کامل

Comparison of Progressive Collapse Capacity of Steel Moment Resisting Frames and Dual Systems with Buckling Retrained Braces

Progressive collapse is a condition where local failure of a primary structural component leads to the collapse of neighboring members and the whole structure, consequently. In this paper, the progressive collapse potential of seismically designed steel dual systems with buckling restrained braces is investigated using the alternate path method, and their performances are compared with those of...

متن کامل

Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation

In the current study the effect of nanoclay content and carbon fiber orientation on the buckling properties of epoxy/nanoclay/ carbon fiber orientation is investigated. Buckling samples were prepared with 1, 3 and 5 wt% of nanoclay and 0, 30 and 45 degrees of fiber orientations based on VARTM technique. The results obtained from the buckling tests showed that adding 1wt% of nanoclay into the pu...

متن کامل

Creasing instability of elastomer films

The creasing instability of elastomer films under compression is studied by a combination of experiment and numerical simulation. Experimentally, we attach a stress-free film on a much thicker and stiffer pre-stretched substrate. When the substrate is partially released, the film is uniaxially compressed, leading to formation of an array of creases beyond a critical strain. The profile of the f...

متن کامل

Creasing-wrinkling transition in elastomer films under electric fields.

Creasing and wrinkling are different types of instabilities on material surfaces characterized by localized singular folds and continuously smooth undulation, respectively. While it is known that electric fields can induce both types of instabilities in elastomer films bonded on substrates, the relation and transition between the field-induced instabilities have not been analyzed or understood....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010