Optimisation of CCPP speed control parameters using genetic algorithm
نویسندگان
چکیده
Abstract: This paper is focused on using the conventional Proportional, Integral and Derivative (PID) controllers optimised using Genetic Algorithm (GA) to control the speed of a Combined Cycle Power Plant (CCPP). The system is simulated using MATLAB/Simulink and the PID controller is implemented as a box in the simulation where the parameters KP, KI and KD have been determined using the GA. Different types of the PID controller have been tried in order to obtain the required speed response which achieves certain transient and steady state behaviour.
منابع مشابه
Optimisation of shock absorber process parameters using failure mode and effect analysis and genetic algorithm
The various process parameters affecting the quality characteristics of the shock absorber during the process were identified using the Ishikawa diagram and by failure mode and effect analysis. The identified process parameters are welding process parameters (squeeze, heat control, wheel speed, and air pressure), damper sealing process parameters (load, hydraulic pressure, air pressure, and ...
متن کاملOptimisation of assembly scheduling in VCIM systems using genetic algorithm
Assembly plays an important role in any production system as it constitutes a significant portion of the lead time and cost of a product. Virtual computer-integrated manufacturing (VCIM) system is a modern production system being conceptually developed to extend the application of traditional computer-integrated manufacturing (CIM) system to global level. Assembly scheduling in VCIM systems is ...
متن کاملModeling and Optimization of Surface Grinding Process Parameters Using Non-dominated Sorting Genetic Algorithm (NSGA)
Surface grinding is the most common process used in the manufacturing sector to produce smooth finish on flat surfaces. Surface quality and metal removal rate are the two important performance characteristics to be considered in the grinding process. The economics of the machining process is affected by several factors such as abrasive wheel grade, wheel speed, depth of cut, table speed and mat...
متن کاملA New Multi-Objective Optimization Method Based on Genetic- Fuzzy Algorithm and its Application in Induction Motor Speed Control
In this paper, a new method based on genetic-fuzzy algorithm for multi-objective optimization is proposed. This method is successfully applied to several multi-objective optimization problems. Two examples are presented: the first example is the optimization of two nonlinear mathematical functions and the second one is the design of PI controller for control of an induction motor drive supplie...
متن کاملPerformance Improvement of Direct Torque Controlled Interior Permanent Magnet Synchronous Motor Drives Using Artificial Intelligence
The main theme of this paper is to present novel controller, which is a genetic based fuzzy Logic controller, for interior permanent magnet synchronous motor drives with direct torque control. A radial basis function network has been used for online tuning of the genetic based fuzzy logic controller. Initially different operating conditions are obtained based on motor dynamics incorporating...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- IJRIS
دوره 3 شماره
صفحات -
تاریخ انتشار 2011