Analysis and model-based control of servomechanisms with friction
نویسندگان
چکیده
Friction is responsible for several servomechanism limitations, and their elimination is always a challenge for control engineers. In this paper, model-based feedback compensation is studied for servomechanism tracking tasks. Several kinetic friction models are employed and their parameters identified experimentally. The effects of friction compensation on system response are examined using describing function analysis. A number of control laws including classical laws, rigid body motion models, and friction compensation are compared experimentally in large-displacement tasks. Results show that the best response is obtained using a controller that incorporates a rigid body model and a friction model based on an accurate description of identified kinetic friction effects. @DOI: 10.1115/1.1849245#
منابع مشابه
Identification of Nonlinear Characteristics for Precision Servomechanisms
A system identification method in the frequency-domain is proposed for a servomechanism with nonlinearities. A linear part of the servomechanism is identified exactly without distortion due to inherent nonlinearities through the proposed method. Parameters of the nonlinearities, including both Coulomb and viscous friction, are identified by the use of limit cycle analysis and describing functio...
متن کاملSensitivity Analysis of Coulomb and HK Friction Models in 2D AFM-Based Nano-Manipulation: Sobol Method
Nanotechnology involves the ability to see and control individual atoms and molecules which are about 100 nanometer or smaller. One of the major tools used in this field is atomic force microscopy which uses a wealth of techniques to measure the topography and investigates the surface forces in nanoscale. Friction force is the representation of the surface interaction between two surfaces an...
متن کاملSliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory
Gear’s normal contact stiffness played an important role in the mechanical equipment. In this paper, the M-B fractal model is modified and the contact surface coefficient is put forward to set up the fractal model, considering the influence of friction, which could be used to calculate accurately the involute arc cylindrical gears’ normal contact stiffness based on the fractal theory and Hertz ...
متن کاملNonlinear Dynamic Modeling and Hysteresis Analysis of Aerospace Hydro - dynamical Control Valves
A new procedure for deriving nonlinear mathematical modeling for a specific class of aerospace hydro - mechanical control valves is presented. The effects of friction on the dynamic behavior of these types of valves along with the experimental verifictions are also given. The modeling approach is based on the combination of the following three tasks: decomposition of the valve into simple speci...
متن کاملEffect of Tool Shoulder and Pin Cone Angles in Friction Stir Welding using Non-circular Tool Pin
In friction stir welding frictional heat is generated by the rotating tool, sliding over the stationary plate along the weld centre. Tool being the only source of heat producing member, its geometrical design influences the heat generation rate. In this present work, effects of variation in tool shoulder and tool pin taper angles on thermal history during joining are analysed. Tools with triang...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002