Estimating the Tire-Road Friction Coefficient Using Disturbance Observer with Compensator
نویسندگان
چکیده
The tire-road friction coefficient is critical to the performance of mobile robots working outdoors. However, it is difficult to measure using commercially available technology sensors. This paper presents a method of estimating the tire-road friction coefficient using a disturbance observer (DO) with compensator; the chassis speed is not needed. In this paper, the torque produced by the tire-road friction is considered to be the disturbance. The DO with compensator is designed to estimate the tire-road friction coefficient using the dynamic behavior of the vehicle model, the traction torque and the wheel velocity. The simulation result shows that the proposed method can estimate the tire-road friction coefficient accurately under different road conditions and has strong robustness on modeling mismatch and vehicle load changing.
منابع مشابه
Estimation of Vehicle Parameters and Road Friction Using Steering Torque and Wheel Speeds
It is often difficult to measure all necessary parameters directly in the current stability control systems. This paper presents a nonlinear observer to estimate vehicle’s yaw rate, lateral acceleration, tire side slip angles and the road friction coefficient based on the measurement signals of the Electric Power Steering (EPS) system and the Anti-lock Braking System (ABS). The performances of ...
متن کاملDesign on Adaptive Fuzzy Observer of Vehicle Side Slip Angle
A novel observer structure for vehicle side slip angle (β ) estimation is proposed, in which a local approximation of the nonlinear tire model is adopted. Fuzzy logic approach is adopted to combine the local observer models so as to deal with the nonlinear nature of vehicle dynamics. The derivation of observer’s state equations and the estimation mechanism is developed. By choosing the membersh...
متن کاملTire-Road Friction Estimation Using Slip-based Observers
In order to improve the security of the vehicles, the car industry focuses more and more on Active Safety. The objective is to introduce embedded electronic control systems to detect dangerous conditions, warn the driver and, in emergency situations, even take actions to avoid crash or at least reduce the violence of the impact. The tire-road friction coefficient which defines the maximum tract...
متن کاملAdaptive Emergency Braking Control with Observer-based Dynamic Tire/road Friction Model and Underestimation of Friction Coefficient
An adaptive control scheme for emergency braking of vehicles is designed based on a LuGre dynamic model for the tire/road friction. The wheel angular speed and longitudinal vehicle acceleration information are used to design an observerestimator for vehicle velocity, friction internal state and friction parameters. A Lyapunov-based stabilizing controller is designed to achieve near maximum brak...
متن کاملDynamic Friction Model-Based Tire-Road Friction Estimation and Emergency Braking Control
An adaptive control scheme for emergency braking of vehicles is designed based on a LuGre dynamic model for the tire-road friction. The wheel angular speed and longitudinal vehicle acceleration information are used to design a fast convergence observer to estimate the vehicle velocity and the internal state of the friction model. The unknown parameters of the dynamic friction model are estimate...
متن کامل