Dynamic Simulation of Water Treatment in Pulp and Paper Industry
نویسنده
چکیده
This paper presents an overview of different modelling and simulation (M & S) methods used in water treatment. Special emphasis is on pulp and paper industry. In chemical water treatment, M & S is successfully used in control design. Hybrid models based on a cascade approach are needed in biological wastewater treatment to cover different operating conditions. Uncertainty handling needs to be included, since the measurement material is rather sparse, especially for on features of the influent and microbial composition.
منابع مشابه
Effect of Metal Salt Coagulants on Treatment of Activated Sludge Effluent in Sulfite Mill Pulp and Paper Plant
Pulp and paper effluents are considered as serious environmental hazards and their treatment, because of multiplicity of impurities and complexity of their chemical structures, is one of the most difficult and inconvenient industrial processes. As the most pulp and paper mill work on kraft process, there are few studies in literature on the treatment of neural sulfite semi chemical (NSSC) p...
متن کاملDeveloping Simulation Models for Dynamic Optimization
Dynamic optimization based on simulation is extremely time consuming. The quest for the optimal solution requires a vast number of iterations. Since the simulation is performed at each iteration step, the decrement of the simulation time becomes crucial. This paper presents the development of simulation models for dynamic optimization. The area of interest is paper and pulp industry. The keywor...
متن کاملInvestigation of Monte Carlo, Molecular Dynamic and Langevin dynamic simulation methods for Albumin- Methanol system and Albumin-Water system
Serum Albumin is the most aboundant protein in blood plasma. Its two major roles aremaintaining osmotic pressure and depositing and transporting compounds. In this paper,Albumin-methanol solution simulation is carried out by three techniques including MonteCarlo (MC), Molecular Dynamic (MD) and Langevin Dynamic (LD) simulations. Byinvestigating energy changes by time and temperature (between 27...
متن کاملA Fully Integrated Method for Dynamic Rock Type Characterization Development in One of Iranian Off-Shore Oil Reservoir
Rock selection in modeling and simulation studies is usually based on two techniques; routinely defined rock types and those defined by special core analysis (SCAL). The challenge in utilizing these two techniques is that they are frequently assumed to be the same, but in practice, static rock-types (routinely defined) are not always representative of dynamic rock-types (SCAL defined) in the re...
متن کاملApplication of ultrafiltration in the pulp and paper industry: metals removal and whitewater reuse.
In the pulp and paper industry, the water use minimization is a constant target. One way to reduce water use is to recycle the effluent in a closed-cycle concept. In paper mills, the main source of liquid effluent is the so-called whitewater, which is the excess water, originated from pulp stock dewatering and other fibre contaminated water. This research studied the reuse of paper mill whitewa...
متن کامل