LMI-based Multiobjective Optimization and Control of Flexible Aircraft Using VCCTEF
نویسندگان
چکیده
This paper considers the control of coupled aeroelastic aircraft model with Variable Camber Continuous Trailing Edge Flap (VCCTEF) system. The relative motion between two adjacent flaps is constrained and this actuation constraint problem is converted into an output covariance constraint problem, and therefore can be formulated using linear matrix inequalities (LMIs). A set of LMI conditions is derived for the design of an observer-based dynamic output feedback controller for VCCTEF configured aeroelastic aircraft model. The proposed controller is then applied to the NASA Generic Transport Model (GTM) for simulation, and the results demonstrate the efficacy of the proposed approach.
منابع مشابه
Numerical Survey of Vibrational Model for Third Aircraft based on HR Suspension System Actuator Using Two Bee Algorithm Objective Functions
This research explains airplane model with two vertical vibrations for airframe and landing gear system. The purpose of this work is to advance vibrational model for study of adjustable vibration absorber and to plan Proportional-Integration-Derivative approach for adapting semi active control force. The coefficients of this method are modified as stated by Bee multiobjective optimization using...
متن کاملReliable H∞ Aircraft Flight Controller Design Against Faults With State/Output Feedback
This paper presents a novel H∞ formulation to design a reliable tracking controller for a discrete LTI aircraft system against actuator outage faults and control surface impairment modelled as polytopic uncertainties. Both the state-feedback and output-feedback cases are considered. The approach is based on multiobjective optimization using several parameter dependent Lyapunov functions, each c...
متن کاملControl of Flexible Link Robot using a Closed Loop Input-Shaping Approach
This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...
متن کاملA Robust Adaptive Observer-Based Time Varying Fault Estimation
This paper presents a new observer design methodology for a time varying actuator fault estimation. A new linear matrix inequality (LMI) design algorithm is developed to tackle the limitations (e.g. equality constraint and robustness problems) of the well known so called fast adaptive fault estimation observer (FAFE). The FAFE is capable of estimating a wide range of time-varying actuator fault...
متن کاملMultiobjective Optimization Applied to Robust H2/H∞ State-feedback Control Synthesis
This paper presents an algorithm for robust H2/H∞ state-feedback control synthesis, with regional pole placement, based on a multiobjective optimization algorithm with non-smooth problem-solving capability. The problem is formulated with the state-feedback matrix coefficients as optimization parameters. The closed-loop performance obtained by means of the proposed strategy is assessed for the w...
متن کامل