Optimization of phenolics and flavonoids extraction conditions of Curcuma Zedoaria leaves using response surface methodology

نویسندگان

  • Nur Fauwizah Azahar
  • Siti Salwa Abd Gani
  • Nor Fadzillah Mohd Mokhtar
چکیده

This study focused on maximizing the extraction yield of total phenolics and flavonoids from Curcuma Zedoaria leaves as a function of time (80-120 min), temperature (60-80 °C) and ethanol concentration (70-90 v/v%). The data were subjected to response surface methodology (RSM) and the results showed that the polynomial equations for all models were significant, did not show lack of fit, and presented adjusted determination coefficients (R2) above 99%, proving their suitability for prediction purposes. Using desirability function, the optimum operating conditions to attain a higher extraction of phenolics and flavonoids was found to be 75 °C, 92 min of extraction time and 90:10 of ethanol concentration ratios. Under these optimal conditions, the experimental values for total phenolics and flavonoids of Curcuma zedoaria leaves were 125.75 ± 0.17 mg of gallic acid equivalents and 6.12 ± 0.23 mg quercetin/g of extract, which closely agreed with the predicted values. Besides, in this study, the leaves from Curcuma zedoaria could be considered to have the strong antioxidative ability and can be used in various cosmeceuticals or medicinal applications.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Multi-Objective Optimization of Artichoke (Cynara Scolymus L.) Leaves Aqueous Extraction Dehydration Through a Novel Spray Drying Approach Using Response Surface Methodology

In this study, Cynara scolymus L. leaves aqueous extract powder was produced using a novel spray drying approach by incorporation of ongoing ultrasonic atomization and vacuumed drying chamber. A Response Surface Methodology (RSM)-based central composite face-centered design was employed for optimization of the operating conditions of the ultrasonic vacuum spray dryer. The independent variab...

متن کامل

Optimization of Extraction Conditions of Some Phenolic Compounds from White Horehound (Marrubium vulgare L.) Leaves

This research was aimed to optimize the extraction conditions of three phenolic compounds: total phenolics, flavonoids and condensed tannins, from White Horehound’s leaves (Marrubium vulgare L.). Distilled water and different organic solvents such as: methanol, ethanol and acetone, were used, with various concentrations (20% 80%, v/v), temperatures (20 ̊C 60 ̊C) and extraction times (30 450 min)....

متن کامل

Optimization of Ultrasonic-Assisted Extraction and Radical-Scavenging Capacity of Phenols and Flavonoids from Clerodendrum cyrtophyllum Turcz Leaves

Ultrasonic-assisted extraction (UAE) was developed to extract phenolic and flavonoid antioxidants from Clerodendrum cyrtophyllum Turcz leaves. The optimal experimental parameters for antioxidant extraction from C. cyrtophyllum leaves were measured using single-factor experimentation combined with response surface methodology (RSM). Total phenolic content (TPC) and total flavonoid content (TFC) ...

متن کامل

Ultrasonic-assisted extraction of condensed tannin from acron, gland, leaf and gall of oak using response surface methodology

Ultrasonic technology and response surface methodology (RSM) wereused for optimization of extraction of condensed tannins from the leaf, acron, gland and gall of oak. Three independent variables such as solvent percentage (%), temperature (°C) and time (min) were studied. Effect of methanol concentration was found to be significant on all responses. Optimal ultrasonicassisted extraction (UAE) c...

متن کامل

Statistical Optimization of Removal of Safranin Dye from Aqueous System Using Biosorbent Obtained from Leaves of Phlomis Cancellata Bunge by Response Surface Methodology

The biosorption performance of Phlomis cancellata Bunge as inexpensive, abundant and easily available adsorbent for safranin cationic dye removal from aqueous system has been evaluated in a batch process, using response surface methodology and employing a central composite design Experimental. The influence of different parameters such as, pH, contact time, agitation rate and sorbent dosage on ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 11  شماره 

صفحات  -

تاریخ انتشار 2017