Numerical Calculation of Subsonic Jets in Crossflow with Reduced Numerical Diffusion

نویسنده

  • Russell W. Claus
چکیده

A serles of calculatlons are reported for two, expenmentally studled, subsonlc Jet In crossflow geometrles. The parametrlc varlatlon examlned lnvolves the lateral spaclng of a row of Jets. The flrst serles of calculatlons corresponds to a wldely spaced Jet geometry, SID = 4, and the second serles corresponds to closely spaced Jets, SID = 2. The calculatlons are done wlth alternate dlfferenClng schemes to lllustrate the lmpact of numer1cal d1ffus1on. The calculated Jet traJectorles agreed well wlth experlmental data In the w1dely spaced Jet geometry, but not 1n the closely spaced geometry.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Analysis of Opposed Rows of Coolant Jets Injected into a Heated Crossflow

The mixing characteristics of coolant air jets with the hot gas exiting the gas turbine combustor’s primary zone is of major importance to the combustor exit temperature profile. In the present work, a three dimensional numerical simulation on the basis of the finite volume method was developed. The aim was to investigate the penetration and mixing characteristics of directly opposed rows of co...

متن کامل

Simulations of High Speed Turbulent Jets in Crossflow

Numerical simulations are used to study an under-expanded sonic jet injected into a supersonic crossflow and an over-expanded supersonic jet injected into a subsonic crossflow. A finite volume compressible Navier–Stokes solver developed by Park & Mahesh (2007) for unstructured grids is used. The flow conditions are based on Santiago et al.’s (1997) and Beresh et al.’s (2005) experiments for son...

متن کامل

Designing and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow

Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...

متن کامل

Direct numerical simulation of passive scalar transport in transverse jets

Direct numerical simulation is used to study passive scalar transport and mixing in a round turbulent jet, in a laminar crossflow. The ratio of the jet velocity to that of the crossflow is 5.7, the Schmidt number of the scalar is 1.49, and the jet-exit Reynolds number is 5000. The scalar field is used to compute entrainment of the crossflow fluid by the jet. It is shown that the bulk of this en...

متن کامل

Designing and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow

Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009