Manufacturing Studies for 3d Hybrid Yarn Based Textile-reinforced Composite Trays
نویسنده
چکیده
Hybrid yarns consisting of thermoplastic filaments and reinforcing glass filaments offer a high potential for highly efficient manufacture technologies for composite structures. The development of an adapted manufacturing technology for thermoplastic 3D shaped textile-reinforced composite trays is presented. In this context a manufacturing concept was developed, the drapability of different textiles made of hybrid yarns was investigated and first prototypes were manufactured using hot pressing technology.
منابع مشابه
Spacer Fabrics from Hybrid Yarn with Fabric Structures as Spacer
Within the scope of Collaborative Research Centre SFB 639 "Textile-reinforced composite components for function-integrating multi-material design in complex lightweight applications", woven and flat-knitted spacer fabrics from commingled hybrid yarns are developed, pressed and the characteristics of the formed composite structures are tested. The developed spacer fabric structures have Ushaped ...
متن کاملCommingled CF/PEEK Hybrid Yarns for Use in Textile Reinforced High Performance Rotors
Owing to a higher melt viscosity compared to the thermoset plastics the impregnation of the textile reinforcement structure with a thermoplastic matrix is significantly difficult. Commingled hybrid yarns produced on the basis of air-jet texturing technique have the potential for a homogeneous distribution of reinforcement and matrix filaments over the yarn cross section. The so achieved very sh...
متن کاملNew Textile Sensors for In Situ Structural Health Monitoring of Textile Reinforced Thermoplastic Composites Based on the Conductive Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Polymer Complex
Many metallic structural and non-structural parts used in the transportation industry can be replaced by textile-reinforced composites. Composites made from a polymeric matrix and fibrous reinforcement have been increasingly studied during the last decade. On the other hand, the fast development of smart textile structures seems to be a very promising solution for in situ structural health moni...
متن کاملInternal Geometry of Structurally Stitched Ncf Preforms
Internal geometry of a textile reinforcement is an important factor of the reinforcement performance during the composite manufacturing and service life. In this article, generalized geometrical models of structural stitching loops are presented for the sewing, tufting, and dual-needle stitching methods. The term 'structural' presumes here that the stitching yarn does not only consolidate the p...
متن کاملEffect of Yarn Twist on Young’s Modulus of Fully-green Composites Reinforced with Ramie Woven Fabrics
INTRODUCTION Today, development of materials technology using biomass is expected for creation of a sustainable society. Especially, the composite consisting of plant-based natural fibers and biodegradable resin, so-called the fully-green composites, is much expected for practical use. So far, we made textile green composites using biodegradable resin and plain woven ramie fabric and explored t...
متن کامل