Modeling of on-Chip Solenoid Integrated Inductor for High Q-Factor Applications
نویسندگان
چکیده
A new structure of the solenoid inductor is presented in this paper. The proposed solenoid inductor has been simulated in a standard 0.18um one-poly-six-metal (1P6M) CMOS process. The proposed inductor products higher quality factor and inductance value in compare with the traditional designs. Furthermore, the new structure shows more improvement in the peak of quality factor so the number of turn increases.
منابع مشابه
Surface Micromachined Solenoid Inductors For High Frequency Applications - Components, Packaging, and Manufacturing Technology, Part C, IEEE Transactions on [see also Compon
As operation frequencies and performance requirements of wireless devices increase, the resultant demands on the performance of passive components also increase. Miniaturization of inductive components for high frequency has been a key research area to address this issue; however, in general, miniaturized integrated inductors can suffer from low Q factors and/or self-resonant frequencies when c...
متن کاملExperimental Results and Die Area Efficient Self-Shielded On-Chip Vertical Solenoid Inductors for Multi-GHz CMOS RFIC
On-chip circular vertical solenoid inductors have been designed and fabricated using standard 6-metal layer CMOS process. Compared to the 4.1nH circular planar spiral inductor on the same chip, the 4.8nH solenoid inductor gives about 20% increase in maximum quality-factor (QF) and 50% increase in self-resonant frequency (SRF), but only occupies 20% of the area. The inductor impedance can be mod...
متن کاملHigh Q-factor On-chip 3-D Inductor for Wireless applications
In current trend for portable wireless communication applications, we require high Q on-chip inductors. In this paper an on-chip 3-D spiral inductor is proposed. High quality factor is achieved by reducing oxide capacitance between substrate and conductor considering permittivity of a substrate. Losses in the structure are reduced by considering high conductivity material like copper or gold. I...
متن کاملSurface micromachined arch-shape on-chip 3-D solenoid inductors for high-frequency applications
Wendell Alan Davis University of Texas at Arlington Department of Electrical Engineering Arlington, Texas 76011 Abstract. We present the design, fabrication, and characterization of surface micromachined on-chip 3-D air-core arch-shape solenoid microinductors. Combinations of unique surface micromachining fabrication process techniques, such as deformation of polymeric sacrifical molds and conf...
متن کاملInductor Modeling of Integrated Passive Device for RF Applications
In this paper, an integrated passive device (IPD) inductor modeling is demonstrated. The IPD technology is a system in package (SiP) solution where passive devices with high quality can be fabricated on a chip and then connect with another circuit chip by using flip-chip micro-bump bonding. For an RF circuit simulation, the IPD inductor model is built and verified from the measurement results. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012