Ii. Solid State Thin Film Lithium Batteries
نویسندگان
چکیده
Solid state thin film lithium microbatteries fabricated by pulsed-laser deposition (PLD) are suggested. During deposition the following process parameters must be considered, which are laser energy and fluence, laser pulse duration, laser pulse frequency, target composition, background gasses, substrate temperature, target-substrate distance and orientation. The effects of the variations of the process parameters can be obtained by measuring stoichiometry, thickness, phases and structure (grain size and texture), and stress of the deposited films. Electrochemical measurements will be conducted to test the microbattery properties through open-circuit voltage, charge-discharge cycling, cyclic voltammetry, and impedance analysis.
منابع مشابه
Toward 3D Solid-State Batteries via Atomic Layer Deposition Approach
3D solid-state batteries are receiving great attentions as on-board power supply systems for small-dimension devices, due to their high power and energy densities. However, the fabrication of 3D solid-state batteries has been a formidable challenge due to the limitation of conventional thin-film techniques. Recently, atomic layer deposition (ALD) has emerged as a powerful approach toward 3D sol...
متن کاملThin film rechargeable lithium batteries for implantable devices.
Thin films of LiCoO2 have been synthesized in which the strongest x-ray reflection is either weak or missing, indicating a high degree of preferred orientation. Thin film solid state batteries with these textured cathode films can deliver practical capacities at high current densities. For example, for one of the cells, 70% of the maximum capacity between 4.2 and 3 V (approximately 0.2 mAh/cm2)...
متن کاملA Nanocrystalline Fe2O3 Film Anode Prepared by Pulsed Laser Deposition for Lithium-Ion Batteries
Nanocrystalline Fe2O3 thin films are deposited directly on the conduct substrates by pulsed laser deposition as anode materials for lithium-ion batteries. We demonstrate the well-designed Fe2O3 film electrodes are capable of excellent high-rate performance (510 mAh g- 1 at high current density of 15,000 mA g- 1) and superior cycling stability (905 mAh g- 1 at 100 mA g- 1 after 200 cycles), whic...
متن کاملFocused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing.
Solid-state electrolytes are a promising replacement for current organic liquid electrolytes, enabling higher energy densities and improved safety of lithium-ion (Li-ion) batteries. However, a number of setbacks prevent their integration into commercial devices. The main limiting factor is due to nanoscale phenomena occurring at the electrode/electrolyte interfaces, ultimately leading to degrad...
متن کاملPreparation and Characterization of Fast Ion Conducting Lithium Thio-Germanate Thin Films Grown by RF Magnetron Sputtering
In this study, amorphous lithium thio-germanate thin films were prepared by radio frequency (RF) sputtering deposition in Ar atmospheres. For the first time, new high quality lithium germanium sulfide nLi2S + GeS2 thin films, n = 1, 2, and 3, have been successfully made by RF sputtering and synthesized as new solid state electrolytes. Although these materials are unstable in air, the starting m...
متن کامل