Control of a post-combustion CO2 capture plant during process start-up and load variations

نویسندگان

  • Jozsef Gaspar
  • John Bagterp Jørgensen
  • Philip Loldrup Fosbøl
چکیده

Dynamic and flexible operation of a carbon capture plant is important as thermal power plants must be operated very flexibly to accommodate large shares of intermittent energy sources such as wind and solar energy. To facilitate such operation, dynamic models for simulation, optimization and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorption and desorption columns in a carbon capture plant. Moreover, we implement a decentralized proportionalintegral (PI) based control scheme and we evaluate the performance of the control structure for various operational procedures, e.g. start-up, load changes, noise on the flue gas flow rate and composition. Note that the carbon capture plant is based on the solvent storage configuration. To the authors knowledge, this is the first paper addressing the issue of start-up operation and control of carbon capture. The study demonstrates that the implemented control structure keeps the carbon capture process at 90% CO2 removal rate with a deviation up to 8% during load variations. In addition, it reveals that the control structure brings the process to the desired set point in approximately 10 min during process start-up.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Energy Savings Potential through Waste Heat Recovery from Flue Gas for Post Combustion Co2 Capture

Flue gas from a plant using fossil fuels contains CO2. Thus power/process plants using fossil fuels contribute to climate change if CO2 in flue gas is not captured. The process of CO2 capture from flue gas is called „postcombustion‟ CO2 capture. Existing plants may be retrofitted with this process to minimize CO2 emission. Amine solutions are mostly used for this process to scrub the flue gas. ...

متن کامل

Functionalized Polymeric Membranes for CO2 Capture

Reducing CO2 emission and lowering the concentration of greenhouse gases in the atmosphere has quickly become one of the most urgent environmental issues. While a variety of technologies and methods have been developed, the separation of CO2 from gas streams is still a critical issue. Apart from establishing new techniques, the exploration of membrane materials with high separation performance ...

متن کامل

Membrane-Cryogenic Post-Combustion Carbon Capture of Flue Gases from NGCC

Membrane gas separation for carbon capture has traditionally been focused on high pressure applications, such as pre-combustion capture and natural gas sweetening. Recently a membrane-cryogenic combined process has been shown to be cost competitive for post-combustion capture from coal fired power stations. Here, the membrane-cryogenic combined process is investigated for application to post-co...

متن کامل

Experimental Studies of CO2 Capturing from the Flue Gases

CO2 emissions from combustion flue gases have turned into a major factor in global warming. Post-combustion carbon capture (PCC) from industrial utility flue gases by reactive absorption can substantially reduce the emissions of the greenhouse gas CO2. To test a new solvent (AIT600) for this purpose, a small pilot plant was used. This paper presents the results of studies ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015