Thermoelectric transport in surface- and antimony-doped bismuth telluride nanoplates

نویسندگان

  • Michael Thompson Pettes
  • Jaehyun Kim
  • Wei Wu
  • Karen C. Bustillo
  • Li Shi
چکیده

Thermoelectric transport in surfaceand antimony-doped bismuth telluride nanoplates Michael Thompson Pettes,1,2 Jaehyun Kim,1 Wei Wu,2 Karen C. Bustillo,3 and Li Shi1,a 1Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas 78712, USA 2Department of Mechanical Engineering and Institute of Materials Science, University of Connecticut, Storrs, Connecticut 06269, USA 3National Center for Electron Microscopy, Molecular Foundry, Lawrence Berkeley National Laboratory, Berkeley, California 94720, USA

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High-yield synthesis of single-crystalline antimony telluride hexagonal nanoplates using a solvothermal approach.

We report a high-yield synthesis of single-crystal hexagonal Sb2Te3 nanoplates using a solvothermal approach. The experimental results show that the concentration of capping agent CTAB played a key role in the formation of nanoplates. This new nanostructure may provide opportunity for the exploration of novel thermoelectric properties and have potential applications in thermoelectric nanodevices.

متن کامل

High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys.

The dimensionless thermoelectric figure of merit (ZT) in bismuth antimony telluride (BiSbTe) bulk alloys has remained around 1 for more than 50 years. We show that a peak ZT of 1.4 at 100 degrees C can be achieved in a p-type nanocrystalline BiSbTe bulk alloy. These nanocrystalline bulk materials were made by hot pressing nanopowders that were ball-milled from crystalline ingots under inert con...

متن کامل

Thermoelectric power factor of ternary single-crystalline Sb2Te3- and Bi2Te3-based nanowires.

Nanowires of bismuth antimony telluride and bismuth telluride selenide (Bi15Sb29Te56 and Bi38Te55Se7) were grown by template-based pulsed electrodeposition. The composition and the crystallinity of the nanowires were determined by high-resolution transmission electron microscopy. The thermoelectric properties (Seebeck coefficient and electrical conductivity) of single p- and n-type nanowires, w...

متن کامل

Effect of the energy dependence of the carrier scattering time on the thermoelectric power factor of quantum wells and nanowires

Related Articles Large magneto (thermo) dielectric effect in multiferroic orthorhombic LuMnO3 J. Appl. Phys. 111, 114103 (2012) High thermoelectric performance of solid solutions CuGa1−xInxTe2 (x=0–1.0) Appl. Phys. Lett. 100, 231903 (2012) Enhanced thermoelectric figure-of-merit ZT for hole-doped Bi2Sr2Co2Oy through Pb substitution J. Appl. Phys. 111, 103709 (2012) Lattice thermal conductivity ...

متن کامل

Screen printed flexible Bi2Te3-Sb2Te3 based thermoelectric generator

This paper reports the fabrication and testing of Bismuth Tellurium (Bi2Te3) – Antimony Tellurium (Sb2Te3) based thermocouples using screen printing technology. In this study, screen printable thermoelectric pastes were developed and the transport properties of cured material were measured. The dimension of each planer thermoleg is 39.3 mm × 3 mm with a thickness of 67 μm for Bi2Te3 leg and 62 ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016