Non - linear finite - element analysis of punching capacities of steel – concrete bridge deck slabs
نویسنده
چکیده
j1 Yu Zheng MEng, PhD Associate Professor, Department of Civil Engineering, Dongguan University of Technology, Dongguan, PR China j2 Des Robinson PhD, MRAeS Senior Lecturer, School of Planning, Architecture and Civil Engineering, Queen’s University of Belfast, Belfast, UK j3 Su Taylor PhD, MICE Reader in Structural Engineering, School of Planning, Architecture and Civil Engineering, Queen’s University Belfast, Belfast, UK j4 David Cleland PhD, FICE, FIStructE Professor, Head of School and Professor of Civil Engineering, School of Planning, Architecture and Civil Engineering, Queen’s University Belfast, Belfast, UK
منابع مشابه
Finite element investigation of the structural behaviour of deck slabs in composite bridges
This research studies the structural behaviour of bridge deck slabs under static patch loads in steel–concrete composite bridges and investigates compressive membrane action (CMA) in concrete bridge decks slabs,which governs the structural behaviour. A non-linear 3D finite element analysismodels was developed using ABAQUS 6.5 software packages. Experimental data from one-span composite bridge s...
متن کاملEffect of Link Slab on Seismic Response of Two Span Straight and Skew Bridges
Highway bridges are frequently constructed as simple span structures with steel or concrete girders and a cast-in-place concrete deck, spanning from one pier to another. At each end of the simple span deck, a joint is provided for deck movement due to temperature, shrinkage, and creep. Bridge deck joints are expensive and pose many problems with regard to bridge maintenance. Elimination of deck...
متن کاملImproving the Punching Shear Strength of RC Slabs by FRP and Steel Sheets
This paper deals with the modeling of punching shear failure in reinforced concrete slabs using nonlinear finite element analysis. The 3D finite element analyses (FEA) were performed with the appropriate modeling of element size and mesh, and the constitutive modeling of concrete. The FE numerical models are validated by comparing with the experimental results obtained from tested specimens and...
متن کاملStudy Punching Shear of Steel Fiber Reinforced Self Compacting Concrete Slabs by Nonlinear Analysis
This paper deals with behavior and capacity of punching shear force for flat slabs produced from steel fiber reinforced self compacting concrete (SFRSCC) by application nonlinear finite element method. Nonlinear finite element analysis on nine slab specimens was achieved by using ANSYS software. A general description of the finite element method, theoretical modeling of concrete and reinforceme...
متن کاملInvestigation of structural behaviour of GFRP reinforced concrete deck slabs through NLFEA
This paper presents a numerical study of the structural behaviour of concrete bridge deck slabs under static patch loads and dynamic traffic loads and an investigation of compressive membrane action (CMA) inside slabs. Those deck slabs were reinforced with Glass Fibre Reinforced Polymer (GFRP) bars. Non-linear finite element analysis (NLFEA) models were established using ABAQUS 6.10 software pa...
متن کامل