Solid Solution Formation during Liquid Phase Sintering
نویسندگان
چکیده
منابع مشابه
Evaluation of Heterogeneous Densification, Anisotropic Shrinkage and Rheological Behavior of Ceramic Materials during Liquid Phase Sintering by Numerical-Experimental Procedure
The effective shear and bulk viscosity, as well as dynamic viscosity, describe the rheological properties of the ceramic body during the liquid phase sintering process. The rheological parameters depend on the physical and thermo-mechanical characteristics of the material such as relative density, temperature, grain size, diffusion coefficient, and activation energy. Thermal behavior of the cer...
متن کاملInfluence of Sintering Temperature on Densification, Structure and Microstructure of Li and Sb Co-Modified (K,Na)NbO3-Based Ceramics
Polycrystalline samples of Lead free (K0.5Na0.5)1−x(Li)x(Sb)x(Nb)1−xO3 ceramics with nominal compositions (x = 0.040 to 0.060) have been prepared by high temperature solid state reaction technique. X-ray diffraction (XRD) pattern shows that the crystal structure transforms from orthorhombic to tetragonal as Li and Sb content increases. Normal sintering process yield compounds with density ~98.2...
متن کاملDENSIFICATION AND MICROSTRUCTURE CHARACTERISTICS OF A PREALLOYED ALPHA BRASS POWDER PROCESSED BY LIQUID PHASE SINTERING
The rapidly solidified prealloyed alpha brass powder with a size range of 40 to 100 μm produced by water atomization process was consolidated using liquid phase sintering process. The relationships between sintering temperature, physic-mechanical properties and microstructural characteristics were investigated. Maximum densification was obtained at 930 °C, under 600 MPa compacting pressure,...
متن کاملComputer Study of Skeletal Settling Combined with Extrication of Solid Phase Domains during Liquid Phase Sintering of Tungsten Heavy Alloy
In this paper, we investigated numerically gravity induced skeletal settling during liquid phase sintering. The microstructural evolution will be simulated by simultaneous computation of displacement of the center of mass and mass transport due to dissolution and precipitation at the interfaces between solid-phase and liquid matrix. Common to this study based on domain methodology for definitio...
متن کاملComputer Study of Liquid Phase Sintering – Three-Dimensional Time Dependent Rearrangement
The rearrangement process during liquid phase sintering has been generally accepted that driven by the capillary forces between solid grains embedded in liquid. This paper outlines a computer-based method for three-dimensional computer simulation of rearrangement during liquid phase sintering. The theoretical models dealing with the fundamental interaction forces that exist between grains attac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017