Effect of focusing flow on stationary spot machining properties in elastic emission machining
نویسندگان
چکیده
Ultraprecise optical elements are applied in advanced optical apparatus. Elastic emission machining (EEM) is one of the ultraprecision machining methods used to fabricate shapes with 0.1-nm accuracy. In this study, we proposed and experimentally tested the control of the shape of a stationary spot profile by introducing a focusing-flow state between the nozzle outlet and the workpiece surface in EEM. The simulation results indicate that the focusing-flow nozzle sharpens the distribution of the velocity on the workpiece surface. The results of machining experiments verified those of the simulation. The obtained stationary spot conditions will be useful for surface processing with a high spatial resolution.
منابع مشابه
Experimental Evaluation of Surface Alterations Induced in Machining of Ti-6Al-4V Alloy
Surface integrity of workpieces after machining processes is one of the most essential requirements of engineers in advanced industries, since it has significant effect on performance and service life of the components. Based on this, thermal and mechanical loads generated by machining are responsible for change in mechanical properties of the machined workpiece and consequently, they should be...
متن کاملApplication of Acoustic Emission Technique in Various Field
This paper reviews applications of acoustic emission sensing techniques in machining. Originally applied to non-destructive testing of structures but now Acoustic Emission Signals are proving to be an effective tool for monitoring of the machining process due to its sensitivity to process parameters. The source of AE is attributed to the release of stored elastic energy that manifests itself in...
متن کاملThe Effect of Electrical Discharge Machining Parameters on Alloy DIN 1.2080 Using the Taguchi Method and Optimal Determinant
Electrical discharge machining process, is one of the most widely used methods for machining, the electrically conductive parts. In this way the tool is not in contact with the workpiece and the hardness of workpiece does not affect the machining speed. In Electrical Discharge Machining process, selection of the correct machining parameters are effective in final cost and the quality of the pro...
متن کاملEffect of Process Variables in Abrasive Flow Machining
When an abrasive mixed with a polymer of special rheological properties and forced through a restricting medium, the abrasive and polymer will act as a self forming tool that precisely removes work piece material and improve the surface finish at those areas restricting to the medium flow. It is capable of machining areas which are difficult to reach by conventional machining and can be used to...
متن کاملExperimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel
The electro discharge machining (EDM), one of the methods used in the machining industry and a non-traditional manufacturing method, the electro erosion process does not depend on the hardness of material and offers a way to process materials of very complex geometry with very fine and high precision by using cheap electrode materials, which make it a preferred method. In this study, effect of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 8 شماره
صفحات -
تاریخ انتشار 2013