Studying as - Cast Microstructure of the Cold Core (cc) Ingot

نویسنده

  • X. D. PENG
چکیده

X. J. Zhang, C. J. Xu (Corresponding Author), Z. Y. Wang, J. Li, L. W. Zhang, X.D. Peng. School of Materials and Metallurgy, University of Science and Technology Liaoning, China In this study, the mechanism of the formation in structure of Cold Core ingot which is prepared by cold core casting method in lab is studied. The structure of the CC ingot is obtained by optical microscopy and macroscopic examination. And finite element simulation result is used to illustrate the heat transfer process of the CC ingot. The results indicated that the macrostructure of the CC ingot is consists of diffusion layer, chilling solidified layer, directional growth, isometric layer and isometric fine grain region layer. In addition, forced heat transfer patterns of the CC ingot affects the orientation distributions and boundary structures of the crystallites combining on the results of the computer simulation, and the influence on the microstructure can be observed clearly under the microscope.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

EFFECT OF THE INCLINED COOLING PLATE CHARACTERISTICS ON THE THIXOTROPIC MICROSTRUCTURE OF A356.0 ALUMINUM ALLOY

In the present work microstructural evolution of A356 Aluminum alloy using an inclined cooling plate casting process for thixoforming feedstock production is investigated. The resultant microstructure was evaluated and compared with those of the same alloy produced by the conventional casting process, i.e. directly cast in the same mold without using an inclined cooling plate. It was found that...

متن کامل

Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel

Duplex stainless steels (DSSS) have a microstructure composed of ferrite and austenite phases that gives them a very good combination of mechanical and corrosion properties. These steels are desirable for many applications in the chemical and petrochemical industries. In the present study, a type of stainless steel was cast, solution annealed at 1200°C for 60 min and then quenched in water. Ini...

متن کامل

Production of Cu-Cr-Zr Alloy Using Electro Slag Remelting Technique (RESEARCH NOTE)

This study focused on the effect of electro slag remelting process (ESR) on microstructure and composition of an as-cast alloy of Cu-Cr-Zr. These observations revealed that applying ESR process results in a more uniform distribution of alloying elements, however a slight aggregation of large precipitates and inclusions existed in as-cast ingot was found. Additionally, impurities like P, S and M...

متن کامل

Effect of Ultrasonic Treatment on the Solidification Microstructure of Die-Cast 35CrMo Steel

The effects of ultrasonic treatment (UST) on the solidification microstructure of a 35CrMo steel cast ingot were investigated. To avoid the erosion of a high-temperature melt, a T-shaped ultrasonic waveguide unit was used to introduce ultrasonic vibrations into a 35CrMo steel die casting melt. The experimental results show that the microstructure of the ingot was refined by ultrasonic treatment...

متن کامل

The microstructure of plasma arc cold-hearth melted Ti-48Al-2Mn-2Nb

The purpose of this paper is to show the results of some work at the IRC in Materials for High Performance Applications at the University of Birmingham into the effect of processing and process parameters on the microstructure, macrostructure and chemistry of 100 mm diameter single plasma-melted ingots of a gamma-based titanium aluminide (Ti-48at%Al-2at%Mn-2at%Nb). The microstructure of the aqm...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016