Design of Pneumatic Diffuser System

نویسندگان

  • Steven C. Wilhelms
  • Charles W. Downer
  • Richard E. Price
چکیده

During non-generation periods, leakage through the wicket gates of a hydroturbine often results in very poor quality water (low or zero dissolved oxygen) in the tailrace of the hydropower facility. Generally, the leakage rate is relatively small, usually about 5-10 cfs per turbine. A bottom-mounted diffuser system was designed based on laboratory-measured and manufacturer-supplied specifications about the gas transfer characteristics of the bubble plume generated by an 11inch flexible head diffuser. The design criteria and the overall effectiveness of the system were evaluated in field tests at Lake Eufaula, Oklahoma. The analysis of field data is reported herein. Introduction Low dissolved oxygen (DO) concentrations in the tailwaters of deep reservoirs with hydropower is not an uncommon occurrence. Even during non-generation periods, low DO can present a problem for managing the tailwater fishery. In most cases, the source of the low DO water is the hypolimnion of the reservoir. A number of alternatives exist that may prevent the development of low DO in the tailrace area. Some may be implemented in the reservoir, in the release structure, or in the tailrace area. The most appropriate technique must be selected based upon clear identification of the source and extent of the low DO water and upon the operat i ona 1 and water qual i ty object i ves of the project. Eufaula Reservoir, located on the Canadian River in Oklahoma, is a hydropower and flood control project operated by the Corps of 'Research Hydraulic Engineer and 2Research Physical Scientist, Hydraulics Laboratory, US Army Engineer Waterways Experiment Station, Vicksburg, Mississippi 1055 Published in Hydraulic Engineering: Saving a Threatened Resource—In Search of Solutions: Proceedings of the Hydraulic Engineering sessions at Water Forum ’92. Baltimore, Maryland, August 2–6, 1992. Published by American Society of Civil Engineers. 1056 HYDRAULIC ENGINEERING Engineers. During the summer months, low DO conditions have been reported in the tailrace area of the project. The cause was identified as leakage of hypol imnetic water through the wicket gates of the hydroturbines during periods of non-generation. The severity of the low-DO problem prompted supplemental releases through a spillway sluice as a mitigative measure. Tailwater aeration held several advantages over in-reservoir enhancement techniques. Specifically, in this technique, only the water being released is aerated rather than treating a significant volume of water in the hypolimnion. This paper reports on the design, installation, and pilot tests of a tailwater aeration system for Eufaula Reservoir. System Concept and Design A floating tailwater aeration system was tested at Denison Dam (Price 1990) in north Texas. Operational considerations dictated that an alternative design be developed. The concept of a bottom-mounted flexible-head diffuser system was developed. The diffuser heads would be mounted in a structural steel member and lowered to the draft tube bottom in the bulkhead slots (Figure 1). The system would remain in

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and Production of a Pneumatic Moving Exciter for Determination of Vibration Behavior of Structures in Variable Frequencies

Determination and analysis of vibration behavior of structures for at least first few natural frequencies and mode shapes needs several sensors to be connected at different non node points and exciting the structure at one point. Other method for determination of first few mode shapes is to excite several points of the structure at once and sensing the response from one point.  Both methods nee...

متن کامل

Study of NACA 0015 for Diffuser Design in Tidal Current Turbine Applications (TECHNICAL NOTE)

Tidal energy is the most foreseeable form of renewable energy. Tidal energy can be harnessed by tidal barrage, tidal fence and tidal current technologies. Present efforts are focused on diffuser augmented tidal turbines that exploit the kinetic energy of the tidal currents. The power output by a tidal turbine is directly proportional to the cube of velocity of incoming fluid flow. Thus, even a ...

متن کامل

Design of Air Distribution System for Operation Theatre Using Flow Visualization Techniques to Improve Flow Characteristics

Operation Theatre (OT) is the most important area where precise controlled on indoor air quality is required because it is directly related to patient health and its recovery period. This work aims to study and visualize the airflow distribution of conventional flat air diffuser ventilation system and newly designed angular air ventilation system in OT. Angular Air Distribution (AAD) system is ...

متن کامل

Enhanced Microbial Activity and Energy Conservation through Pneumatic Mixing in Sludge Systems

The primary goal of this study was to evaluate a new device and system, designed to optimize the performance of standard low pressure air diffusers in two types of aerated systems (activated sludge and aerobic sludge digestion) and to decrease overall energy consumption. Aerated treatment systems are very important in the treatment of wastewaters and management of sludges. The activated sludge ...

متن کامل

Conceptual Design of Single-Acting Oleo-Pneumatic Shock Absorber in Landing Gear with Combined Method

Landing gear is a structure that is mounted under the fuselage and helps the aircraft in takeoffs and landings. The most important duty of landing gear is the control of vibration exerted on the system through the shock absorber which is a common component to all the landing gear. Considering the importance of this issue, the necessity of investigating shock absorber with features such as high ...

متن کامل

CFD Simulation of Gas-Solid Two-Phase Flow in Pneumatic Conveying of Wheat

Computational Fluid Dynamics (CFD) simulations of gas-solid flow through a positive low-pressure pneumatic conveyor were performed using Eulerian-Eulerian framework. Pressure drop in pneumatic conveying pipelines, creation and destruction of plugs along the horizontal and vertical pipes, effect of 90° elbows and U-bends on cross-section concentrations, and rope formation and dispersion were...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017