Supercritical CO2 Foaming of Thermoplastic Materials Derived from Maize: Proof-of-Concept Use in Mammalian Cell Culture Applications

نویسندگان

  • Grissel Trujillo-de Santiago
  • Cynthia Guadalupe Portales-Cabrera
  • Roberto Portillo-Lara
  • Diana Araiz-Hernández
  • Maria Cristina Del Barone
  • Erika García-López
  • Cecilia Rojas-de Gante
  • María de los Angeles De Santiago-Miramontes
  • Juan Carlos Segoviano-Ramírez
  • Silverio García-Lara
  • Ciro Ángel Rodríguez-González
  • Mario Moisés Alvarez
  • Ernesto Di Maio
  • Salvatore Iannace
چکیده

BACKGROUND Foams are high porosity and low density materials. In nature, they are a common architecture. Some of their relevant technological applications include heat and sound insulation, lightweight materials, and tissue engineering scaffolds. Foams derived from natural polymers are particularly attractive for tissue culture due to their biodegradability and bio-compatibility. Here, the foaming potential of an extensive list of materials was assayed, including slabs elaborated from whole flour, the starch component only, or the protein fraction only of maize seeds. METHODOLOGY/PRINCIPAL FINDINGS We used supercritical CO2 to produce foams from thermoplasticized maize derived materials. Polyethylene-glycol, sorbitol/glycerol, or urea/formamide were used as plasticizers. We report expansion ratios, porosities, average pore sizes, pore morphologies, and pore size distributions for these materials. High porosity foams were obtained from zein thermoplasticized with polyethylene glycol, and from starch thermoplasticized with urea/formamide. Zein foams had a higher porosity than starch foams (88% and 85%, respectively) and a narrower and more evenly distributed pore size. Starch foams exhibited a wider span of pore sizes and a larger average pore size than zein (208.84 vs. 55.43 μm2, respectively). Proof-of-concept cell culture experiments confirmed that mouse fibroblasts (NIH 3T3) and two different prostate cancer cell lines (22RV1, DU145) attached to and proliferated on zein foams. CONCLUSIONS/SIGNIFICANCE We conducted screening and proof-of-concept experiments on the fabrication of foams from cereal-based bioplastics. We propose that a key indicator of foamability is the strain at break of the materials to be foamed (as calculated from stress vs. strain rate curves). Zein foams exhibit attractive properties (average pore size, pore size distribution, and porosity) for cell culture applications; we were able to establish and sustain mammalian cell cultures on zein foams for extended time periods.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of expansion cooling regime on morphology of poly(Epsilon-caprolactone) foams prepared by pressure quenching using supercritical CO2

Creation of foam structures from hydrolytically degradable poly(ε-caprolactone) (PCL) is a current task in biomaterial research. One example are degradable scaffolds. The thermodynamic and kinetic conditions in a supercritical CO2 (scCO2) supported foaming process of PCL can influence the resulting morphology of the foam. PCL-foaming with scCO2 was systematically investigated in the pressure ra...

متن کامل

Potential Use of Amniotic Membrane Derived Scaffold for Cerebrospinal Fluid Applications

Scaffolds derived from decellularized tissues provide a natural microenvironment for cell culture. Embryonic cerebrospinal fluid (e-CSF) contains factors which play vital roles in development of the nervous system. This research was aimed to survey the effect of Wistar rat e-CSF on neural differentiation of bone marrow derived mesenchymal stem cells (BM-MSCs) cultured on the human amniotic memb...

متن کامل

Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering.

Bone is a complex porous composite structure with specific characteristics such as viscoelasticity and anisotropy, both in morphology and mechanical properties. Bone defects are regularly filled with artificial tissue grafts, which should ideally have properties similar to those of natural bone. Open cell composite foams made of bioresorbable poly(L-lactic acid) (PLA) and ceramic fillers, hydro...

متن کامل

Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam

In this article, the effects of different foam production times and temperatures on the mechanical, physical, and structural properties of polypropylene (PP) foam has been investigated. The microcellular PP foams were carried out using supercritical carbon dioxide (sc-CO2) as a physical foaming agent in a batch process. The samples were placed in a pressure vessel and were saturated ...

متن کامل

A Quick update from the Past to Current Status of Human Pluripotent Stem Cell-derived Hepatocyte culture systems

Pluripotent stem cells (PSCs) may be offered as an unlimited cell source for the hepatocyte generation. The generation of hepatocytes from stem cells in vitro would provide an alternative cell source for applications in drug discovery and cell transplantation. In this review, we discuss different approaches to generate pluripotent stem cell-derived hepatocytes, advantages, limitations for each ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 10  شماره 

صفحات  -

تاریخ انتشار 2015