New Design of a Broadband Microwave Zero Bias Power Limiter

نویسنده

  • Khalifa ECHCHAKHAOUI
چکیده

In this paper a new design of a broadband microwave power limiter is presented and validated into simulation by using ADS software (Advanced Design System) from Agilent technologies. The final circuit is built on microstrip lines by using identical Zero Bias Schottky diodes. The power limiter is designed by Associating 3 stages Schottky diodes. The obtained simulation results permit to validate this circuit with a threshold input power level of 0 dBm until a maximum input power of 30 dBm. Keywords— Limiter, microstrip, zero-biais.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

MMICs for Broadband Receiver Applications

This paper details the design, realisation and measured performance of a set of MMICs for broadband receiver applications. Five different MMICs are described: A 0.5 to 20GHz dual channel limiter, a 2 to 18GHz dual channel Low Noise Amplifier (LNA), a DC to 20GHz dual channel Single Pole Double Throw (SPDT) switch, a 2 to 18GHz upconverter and a companion downconverter. The MMICs can be used to ...

متن کامل

Destruction and Dechlorination of Aroclor1254 in Real Waste Transformer Oil Using Microwave Irradiation, Microwave Absorbent and Reactive Materials

Background: In this research, the decomposition of Aroclor 1254, including 20 kinds of poly chlorinated biphenyls (PCBs), in real waste transformer oil in the presence of PEG1000, NaOH, zero valent iron and H2O by microwave (MW) irradiation was studied. Methods: Central composites design (CCD) method was carried out for experimental design. The effects of microwave power levels (200- 1000 W), ...

متن کامل

A Broadband Low Power CMOS LNA for 3.1–10.6 GHz UWB Receivers

A new approach for designing an ultra wideband (UWB) CMOS low noise amplifier (LNA) is presented. The aim of this design is to achieve a low noise figure, reasonable power gain and low power consumption in 3.1-10.6 GHz. Also, the figure of merit (FOM) is significantly improved at 180nm technology compared to the other state-of-the-art designs. Improved π-network and T-network are used to obt...

متن کامل

Broadband Microwave Integrated Circuits for Voltage Standard Applications

This thesis addresses integrated circuit component, packaging, and microwave design for both AC and DC Josephson voltage standard (JVS) systems. The components developed in this work combine techniques from both the distributed and lumped-element microwave design in the frequency range 0–40 GHz. The National Institute of Standards and Technology (NIST) JVS systems rely on 10 000 to 300 000 micr...

متن کامل

Single-chip Dual-band WLA using InGaP/GaA

A single-chip dual-band power amplifier monolithic microwave integrated circuit (MMIC) operating at 3.5V single supply has been developed for both WLAN 2.4GHz and 5.2GHz with IEEE 802.11b/g/a standards applications. The MMIC utilizes the process of WINs Corp. with an InGaP/GaAs HBT process. The dual-band power amplifier constructed based on the design of adaptive RF bias choke circuits and prop...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015