Granular metamaterials for vibration mitigation
نویسندگان
چکیده
Acoustic metamaterials that allow low-frequency band gaps are interesting for many practical engineering applications, where vibration control and sound insulation are necessary. In most prior studies, the mechanical response of these structures has been described using linear continuum approximations. In this work, we experimentally and theoretically address the formation of low-frequency band gaps in locally resonant granular crystals, where the dynamics of the system is governed by discrete equations. We investigate the quasi-linear behavior of such structures. The analysis shows that a stopband can be introduced at about one octave lower frequency than in materials without local resonances. Broadband and multi-frequency stopband characteristics can also be achieved by strategically tailoring the non-uniform local resonance parameters.
منابع مشابه
Composite 3D-printed metastructures for low-frequency and broadband vibration absorption.
Architected materials that control elastic wave propagation are essential in vibration mitigation and sound attenuation. Phononic crystals and acoustic metamaterials use band-gap engineering to forbid certain frequencies from propagating through a material. However, existing solutions are limited in the low-frequency regimes and in their bandwidth of operation because they require impractical s...
متن کاملPassive Vibration Control for Fatigue Damage Mitigation in Steel Jacket Platforms
Considering the stress cycles in the joints and members due to wave induced forces on offshore platforms, fatigue analysis is therefore one of the most important analyses in the offshore platforms design. Although most of the steel jacket type platforms are designed and located in areas with relatively high ratios of operational sea-states, for maximum environmental events, would have acceptabl...
متن کاملOptimal Nonlinear Energy Sinks in Vibration Mitigation of the Beams Traversed by Successive Moving Loads
Optimal Nonlinear Energy Sink (NES) is employed in vibration suppression of the beams subjected to successive moving loads in this paper. As a real application, a typical railway bridge is dynamically modeled by a single-span beam and a traveling high-speed train is simulated by a series of successive moving loads. Genetic algorithm is employed as the optimization technique and optimal paramete...
متن کاملAcoustic and elastic metamaterials
We will review some of the recent advances in the field of acoustic and elastic metamaterials. These research fields became hot topics in last few years with an increasing number of papers that grows almost exponentially. The interest on these artificial structures arouses because of their potential application in designing novel devices for sound and vibration control. Their applications cover...
متن کاملDetermination of effective mass density and modulus for resonant metamaterials.
This work presents a method to determine the effective dynamic properties of resonant metamaterials. The longitudinal vibration of a rod with periodically attached oscillators was predicted using wave propagation analysis. The effective mass density and modulus were determined from the transfer function of vibration responses. Predictions of these effective properties compared favorably with la...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013