Impact of Battery’s Model Accuracy on Size Optimization Process of a Standalone Photovoltaic System
نویسندگان
چکیده
This paper presents a comparative study between two proposed size optimization methods based on two battery’s models. Simple and complex battery models are utilized to optimally size a standalone photovoltaic system. Hourly meteorological data are used in this research for a specific site. Results show that by using the complex model of the battery, the cost of the system is reduced by 31%. In addition, by using the complex battery model, the sizes of the PV array and the battery are reduced by 5.6% and 30%, respectively, as compared to the case which is based on the simple battery model. This shows the importance of utilizing accurate battery models in sizing standalone photovoltaic systems.
منابع مشابه
Optimizing Design of Stand-alone Hybrid Solar Micro-CHP Systems Using LUS Based Particle Swarm Optimization Algorithm
Utilizing the combined cooling, heating and power generation (CHP) systems to produce cooling, heat and electricity is growing rapidly due to their high efficiency and low emissions in commercial and industrial applications. In conventional CHP systems the deficit of the system power can be purchased from the grid. However, this system cannot be used as the standalone application. The hybrid so...
متن کاملAdaptive neuro-fuzzy inference system and neural network in predicting the size of monodisperse silica and process optimization via simulated annealing algorithm
In this study, Back-propagation neural network (BPNN) and adaptive neuro-fuzzy inference system (ANFIS) methods were applied to estimate the particle size of silica prepared by sol-gel technique. Simulated annealing algorithm (SAA) employed to determine the optimum practical parameters of the silica production. Accordingly, the process parameters, i.e. tetraethyl orthosilicate (TEOS), H2O and N...
متن کاملTechno-economic Optimization of a Stand-alone Photovoltaic-battery Renewable Energy System for Low Load Factor Situation- a Comparison between Optimization Algorithms
For remote places having less-strong wind, single resources based renewable energy system (RES) with battery storage can sustainably and economically generate electrical energy. There is hardly any literature on optimal sizing of such RES for very low load demand situation. The objective of this study is to techno-economically optimize the system design of a Photovoltaic (PV)-battery storage RE...
متن کاملEstimating the Parameters in Photovoltaic Modules: A Constrained Optimization Approach
This paper presents a novel identification technique for estimation of unknown parameters in photovoltaic (PV) systems. A single diode model is considered for the PV system, which consists of five unknown parameters. Using information of standard test condition (STC), three unknown parameters are written as functions of the other two parameters in a reduced model. An objective function and ...
متن کاملImpact of queuing theory and alternative process routings on machine busy time in a dynamic cellular manufacturing system
A new mathematical model based on the alternative process routings in presence of a queuing system in a dynamic cellular manufacturing system has been proposed in this paper.This model integrates two problems of cell formation and inter-cell layout and also an efficiency factor which is defined for minimizing the cell load variation through the maximizing the busy time for all machine types. In...
متن کامل