Clipping and Filtering Technique for reducing PAPR In OFDM
نویسندگان
چکیده
– Recently, Orthogonal Frequency Division Multiplexing (OFDM), as a multi-carrier, and a single carrier transmission systems are used widely in the communications industrial systems. Each one of these two techniques has their own advantages and disadvantages. To maintain a high data rate, OFDM is preferred over the single-carrier transmission system due to several shortages like, complexity of equalizing that increases proportionally with the data rate. To overcome this problem, OFDM is used as a transmission system with much better Bet Error Rate (BER) performance. Peak-to-Average-Power ratio (PAPR) is major drawback of using OFDM but we can deal with it using clipping and filtering as a power reduction technique. Keywords–– Additive White Gaussian Noise (AWGN), BER, high data rate, Multi-Carrier, OFDM, SingleCarrier (SC),
منابع مشابه
PAPR Reduction in an OFDM system using Recursive Clipping and Filtering Technique
An Orthogonal Frequency Division Multiplexing (OFDM) scheme is expected as an efficient technique for next generation wireless communications. However, high Peak to Average Power Ration (PAPR) of OFDM system is the main drawback which degrades the transmitter power efficiency causes poor performance of the system. To reduce PAPR of OFDM signal, several works on clipping technique have been prop...
متن کاملEvaluation of Optimized PAPR and BER of OFDM signal by using Clipping and Filtering Technique
-Orthogonal Frequency Division Multiplexing (OFDM) is an emerging field of research in the field of wireless communication and finds its application where high data rate is required at low latency and better spectral efficiency. Peak to Average Power Ratio (PAPR) is the limiting factor for an OFDM system as it degrades the system performance by reducing SQNR of ADC/DAC as well as it affects the...
متن کاملPAPR Reduction in OFDM using Clipping and Filtering
Abstract: Orthogonal Frequency Division Multiplexing (OFDM) is an emerging field of research in the field of wireless communication and finds its application where high data rate is required at low latency and better spectral efficiency. Peak to Average Power Ratio (PAPR) is the limiting factor for an OFDM system as it degrades the system performance by reducing SQNR of ADC/DAC as well as affec...
متن کاملImproved Clipping Technique for Reducing the Peak to Average Power Ratio in OFDM Systems
Peak to Average Power Ratio (PAPR) is one of the disadvantages of OFDM system, which had been studied in several papers and reduced in several techniques. Clipping and filtering are an effective technique for reducing the PAPR in OFDM systems. It requires an accurate filtering to reduce the resulting in-band and out-ofband noise. In this paper, an improved clipping technique is proposed. The te...
متن کاملClipping Technique for BER and PAPR Reduction in OFDM System
Peak to Average Power Ratio (PAPR) is one of most detrimental aspects in any wireless communication system using multicarrier modulation technique like OFDM, which cause power degradation and spectral spreading. Due to the simplest way for PAPR reduction, clipping technique has been proposed and seems to be promising for use in commercial system. In this paper, we mainly focus on Amplitude clip...
متن کاملHardware Implementation of PAPR Reduction with Clipping and Filtering Technique for Mobile Applications
Abstract-Orthogonal frequency division multiplexing (OFDM) is preferred for mobile communications applications due to its increased data transmission capability. At one hand, it has advantages of being robust to multipath fading and possessing high data rate transmission capability, on the other hand it suffers from high peak to average power ratio (PAPR). In this paper FPGA implementation of c...
متن کامل