Development of a deep-sea laser-induced breakdown spectrometer for in situ multi-element chemical analysis

Spectroscopy is emerging as a technique that can expand the envelope of modern oceanographic sensors. The selectivity of spectroscopic techniques enables a single instrument to measure multiple components of the marine environment and can form the basis for versatile tools to perform in situ geochemical analysis. We have developed a deep-sea laser-induced breakdown spectrometer (ChemiCam) and successfully deployed the instrument from a remotely operated vehicle (ROV) to perform in situ multi-element analysis of both seawater and mineral deposits at depths of over 1000 m. The instrument consists of a long-nanosecond duration pulse-laser, a spectrometer and a high-speed camera. Power supply, instrument control and signal telemetry are provided through a ROV tether. The instrument has two modes of operation. In the first mode, the laser is focused directly into seawater and spectroscopic measurements of seawater composition are performed. In the second mode, a fiberoptic cable assembly is used to make spectroscopic measurements of mineral deposits. In this mode the laser is fired through a 4 m long fiber-optic cable and is focused onto the target’s surface using an optical head and a linear stage that can be held by a ROV manipulator. In this paper, we describe the instrument and the methods developed to process its measurements. Exemplary measurements of both seawater and mineral deposits made during deployments of the device at an active hydrothermal vent field in the Okinawa trough are presented. Through integration with platforms such as underwater vehicles, drilling systems and subsea observatories, it is hoped that this technology can contribute to more efficient scientific surveys of the deep-sea environment. & 2014 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).