Ess Medium and High Beta Cavity Prototypes
نویسندگان
چکیده
In the framework of the ESS activity in progress at INFN-LASA, we are designing and developing 704.42 MHz Medium (β=0.67) and High (β=0.86) beta prototype cavities plug compatible with the ESS cryomodule design. The cells of one Medium and one High beta cavity are fabricated with high quality CBMM Large Grain Niobium (480 mm dia. Ingot, RRR=300, sliced by Heraeus) while a Medium beta cavity is done with Fine Grain material for comparison. The prototype cavities will be produced by the firm Ettore Zanon S.p.A. under the supervision of INFN LASA group.
منابع مشابه
A New Cavity Design for Medium Beta Acceleration *
Heavy duty or CW, superconducting proton and heavy ion accelerators are being proposed and constructed worldwide. The total length of the machine is one of the main drivers in terms of cost. Thus HWR and spoke cavities at medium beta are usually optimized to achieve low surface field and high gradient. Typically, a reasonable project nowadays will limit the Ep and Bp to <35 MV/m and <80 mT, res...
متن کاملSome Considerations on the Choice of Frequency and Geometrical Beta in High Power Proton Linacs in the Context of Higher Order Modes
Several high power superconducting (SC) proton linear accelerators are currently in the design stage around the world, such as for example the European Spallation Source (ESS) in Lund, Project X at Fermilab, the European ADS demonstrator MYRRAH in Mol, and the Superconducting Proton linac (SPL) at CERN. In this contribution, the influence of Higher Order Modes (HOMs) in elliptical SC cavities i...
متن کاملHigh-fidelity or Low-fidelity, Paper or Computer? Choosing Attributes When Testing Web Prototypes
Interface designs are currently tested in a mixture of fidelities and media. So far, there is insufficient research to indicate what level of fidelity and media will produce the best feedback from users. This experiment compared user testing with lowand high-fidelity prototypes in both computer and paper media. Task-based user tests of sketched (low-fidelity) and HTML (high-fidelity) website pr...
متن کاملThe microbiology of recurrent rhinosinusitis after endoscopic sinus surgery.
OBJECTIVE To determine the microbiology of recurrent sinus infections occurring in patients after endoscopic sinus surgery (ESS). DESIGN Retrospective review of sinus cultures obtained over a 4-year period from a consecutive series of patients who underwent ESS. SETTING An academic general otolaryngology practice. RESULTS A total of 290 cultures were performed in 125 patients after ESS. T...
متن کاملNumerical Study of Natural Convection in a Square Cavity Filled with a Porous Medium Saturated with Nanofluid
Steady state natural convection of Al2O3-water nanofluid inside a square cavity filled with a porous medium is investigated numerically. The temperatures of the two side walls of the cavity are maintained at TH and TC, where TC has been considered as the reference condition. The top and the bottom horizontal walls have been considered to be insulated i.e., non-conducting and impermeable to mass...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016