Cad Model to Predict the Effect of Radome on the Characteristics of Rectangular Patch Antenna
نویسنده
چکیده
Abstract: A simple and efficient CAD model based on cavity model analysis is proposed to compute accurately the resonant frequency, input impedance, bandwidth and gain of radome loaded rectangular patch antenna. The computed values for wide range of radome parameters are compared with different theoretical and experimental values available in open literature. The computed values employing the present model shows very close agreements with the experiments compared to the other model. An electromagnetic software (HFSS) is also used to generate some simulated data.
منابع مشابه
Design and Implementation of Triple Band Microstrip Patch Antenna using LTCC and RT Duroid Including Random Effect
For most of the weather antenna application, the antenna must be covered with radome to enhance operational efficiency in all weather circumstances. This radome provides environmental protection and along with that it enhances antenna performance. The antenna manufacturer must evaluate radome scattering level so that they can estimate the parameter of cost effective antenna and can provide maxi...
متن کاملCad Model to Compute the Input Impedance of an Equilateral Triangular Microstrip Patch Antenna with Radome
A very simple and more efficient CAD model is proposed to demonstrate the effect on input impedance characteristics based on cavity model analysis for wide range of superstrate parameters and feed locations of an equilateral triangular microstrip patch antenna having different side lengths. The computed values are compared with different theoretical and experimental values available in open lit...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملModified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملDetermination of Resonance Frequency of Dominant and Higher Order Modes in Thin and Thick Circular Microstrip Patch Antennas with Superstrate by MWM (RESEARCH NOTE)
An accurate model named as the Modified Wolff Model (MWM) is presented as an efficient CAD tool for determination of resonant frequency of the dominant and higher order modes under the multi-layer condition in thin and thick circular microstrip patch antennas. The effects of dielectric cover on the resonant frequency obtained from MWM have been compared against the result of theoretical method ...
متن کامل