Recovery of structure of looped jointed objects from multiframes
نویسنده
چکیده
A method to recover structural parameters of looped jointed objects from multiframes is being developed. Each rigid part of the jointed body needs only to be traced at two (that is at junction) points. This method has been linearized for 4-part loops, with recovery from at least 19 frames.
منابع مشابه
Jointed Rock Mass Effects on the Seismic Waves Scattering from the Canyon Sites in the Dam's Support
Seismic study of canyon sites has always been one of the important fields of seismic studies because of massive structures such as dams that are built in such sites. Jointed rock mass in rock canyon sites is one of the main site effects that can change the seismic waves. In this research, we studied the influence of this factor on the scattering of seismic waves. To fulfil this goal, we employe...
متن کاملPerformance Analysis of Nail Walls in Jointed Rocks Based on Excavation-Induced Damage
Evaluation of the excavation-induced ground movements is an important design aspect of supporting system in urban areas. This evaluation process is more critical to the old buildings or sensitive structures which exist in the excavation-affected zone. Frame distortion and crack generation are predictor, of building damage resulted from excavation-induced ground movements, which pose challenges ...
متن کاملDistribution of degrees of freedom over structure and motion of rigid bodies
This paper is concerned with recovery of motion and structure parameters from multiframes under orthogonal projection when only points are traced. The main question is how many points and/or how many frames are necessary for the task. It is demonstrated that 3 frames and 3 points are the absolute minimum. Closed-form solution is presented. Furthermore, it is shown that the task may be linearize...
متن کاملStatic Analysis of Moving Jointed Objects
The problem of interpreting images of moving jointed objects is considered. Assuming the existence of a connectedness model, an algorithn is presented for calculating the rigid part lengths and motion of the jointed objects just from the positions of the joints and some depth information. The algorithn is proved correct.
متن کاملNonlinear Modeling of Bolted Lap Jointed Structure with Large Amplitude Vibration of Timoshenko Beams
This paper aims at investigating the nonlinear behavior of a system which is consisting of two free-free beams which are connected by a nonlinear joint. The nonlinear system is modelled as an in-extensional beam with Timoshenko beam theory. In addition, large amplitude vibration assumption is taken into account in order to obtain exact results. The nonlinear assumption in the system necessities...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- CoRR
دوره abs/1705.01148 شماره
صفحات -
تاریخ انتشار 2017