Numerical Simulation of Water Entry of Different Arbitrary Bow Sections
نویسندگان
چکیده
Water impact phenomenon of general bow section is a critical event for planning hulls. In this paper, the water entry of several arbitrary bow sections is investigated. For this purpose, arbitrary bow shapes which are introduced by Lewis form approximation are considered. In order to obtain pressure distribution and free surface profile, volume of fluid (VOF) method coupled with finite volume method (FVM) are utilized in ANSYS-CFX solver. Pressure distribution, free surface, and evolution of intersection point on bow sections are presented, while secondary water impact is demonstrated. Comparison of the obtained results against previously published works shows good agreement.
منابع مشابه
Numerical simulation of water entry of tunnel cross section with different deadrise angles and tunnel radiuses
This study deals with the numerical modeling of symmetrical water entry of tunneled sections. In this study, firstly, the water entry problem of a wedge section without tunnel in four different deadrise angles was numerically modeled. The obtained results related to the pressure distribution on these sections and the maximum pressure have been compared with the experiment results. In the next s...
متن کاملThermal Development for Ducts of Arbitrary Cross Sections by Boundary-Fitted Coordinate Transformation Method
The non-orthogonal boundary-fitted coordinate transformation method is applied to the solution of steady three-dimensional momentum and energy equations in laminar flow to obtain temperature field and Nusselt numbers in the thermal entry region of straight ducts of different cross sectional geometries. The conservation equations originally written in Cartesian coordinates are parabolized in the...
متن کاملNumerical Solution of Reacting Laminar Flow Heat and Mass Transfer in Ducts of Arbitrary Cross-Sections for Newtonian and Non-Newtonian Fluids
This study is concerned with the numerical analysis, formulation, programming and computation of steady, 3D conservation equations of reacting laminar flow heat and mass transfer in ducts of arbitrary cross-sections. The non-orthogonal boundary-fitted coordinate transformation method is applied to the Cartesian form of overall-continuity, momenta, energy and species-continuity equations, parabo...
متن کاملViscous Models Comparison in Water Impact of Twin 2D Falling Wedges Simulation by Different Numerical Solvers
In this paper, symmetric water entry of twin wedges is investigated for deadrise angle of 30 degree. Three numerical simulation of a symmetric impact, considering rigid body dynamic equations of motion in two-phase flow is presented. The two-phase flow around the wedges is solved by Finite Element based on Finite Volume method (FEM-FVM) which is used in conjunction with Volume of Fluid (VOF) sc...
متن کاملThe Effect of Asymmetric Water Entry on the Hydrodynamic Impact
The effect of the asymmetric water entry over a submerged part of a ship on the hydrodynamic impact is investigated numerically. A wedge body is considered to study and the problem is assumed to be two-dimensional. The Results of symmetric and asymmetric impacts are compared together. The effect is found significant in the numerical simulation. The maximum hydrodynamic pressure at a heel angle ...
متن کامل