A novel power converter for photovoltaic applications
نویسندگان
چکیده
A simple and economical power conditioner to convert the power available from solar panels into 60 Hz ac voltage is described. The raw dc voltage from the solar panels is converted to a regulated dc voltage using a boost converter and a large capacitor and the dc output is then converted to 60 Hz ac using a bridge inverter. The ratio between the load current and the short-circuit current of a PV panel at maximum power point is nearly constant for different insolation (light) levels and this property is utilized in designing a simple maximum power point tracking (MPPT) controller. The controller includes a novel arrangement for sensing the short-circuit current without disturbing the operation of the PV panel and implementing MPPT. The switching losses in the inverter are reduced by using snubbers. The results obtained on an experimental converter are presented. © 2004 Elsevier B.V. All rights reserved.
منابع مشابه
The Novel Control Method for Photovoltaic Converter to the National Grid
In this paper, a novel control method for photovoltaic converter connection to the national gridis presented, so in addition to the injection control by solar arrays to the grid, this method cancompensate reactive power and harmonics in the load current. The system will be connected inparallel between the grid and load. The proposed system supplies all load power consumption(including active po...
متن کاملHigh performance Cuk converter considering non-linear inductors for photovoltaic system applications
The Cúk converter, which has voltage buck and boost ability, offers high flexibility as an interface device for solar panels. In addition, current ripple can be more reduced because of two input and output inductors at both sides. This paper presents a new application of current-variable inductors in a Cúk converter that reduces the size and capacity of storage elements. Because of two inductor...
متن کاملA new fuzzy-based maximum power point tracker for photovoltaic applications
A new fuzzy maximum power point tracker (MPPT) for photovoltaic systems is proposed. Fuzzy controller input parameters dI dP , ) dI dP ( D and variation of duty cycle ( DC D ) are used to generate the optimal MPPT converter duty cycle, such that solar panel maximum power is generated under different operating conditions. A photovoltaic system including a solar panel, a fuzzy MPP tracker and...
متن کاملAnalysis and Experimentation of Soft Switched Interleaved Boost Converter for Photovoltaic Applications
Conventional energy sources are fast depleting due to poor conservation practises and excessive usage while the world’s energy demands are growing by minute. Additionally, the cost of producing conventional energy is rising also leading to an increase in harmful environmental pollution. Hence, there is a need to look at alternative energy sources such as sun, water and wind. Photovoltaic (PV) i...
متن کاملA Multi-port High Step-up DC/DC Converter for Hybrid Renewable Energy Application
This paper presents a novel multi-port DC/DC converter which is suitable to be used as the interface of hybrid renewable energy systems. The converter contains three unidirectional power flow ports which two of them are input ports and are connected to two independent energy sources while the third one is the output port that feeds a standalone load. Furthermore, the proposed converter contains...
متن کاملHigh gain multi-input DC-DC converter with combined phase-shift/PWM modulation for stand-alone applications
The existence of unreliable renewable energy resources would be required to use energy resources and storage units simultaneously, particularly in applications such as electrical vehicles and stand-alone energy supplying systems. The objective of this paper is to introduce a new topology of multi input converter in hybrid power supply system of photovoltaic, fuel cell and battery for medium pow...
متن کامل