Transparent Interconnection of Lots of Links (TRILL): Fine-Grained Labeling
نویسندگان
چکیده
The IETF has standardized Transparent Interconnection of Lots of Links (TRILL), a protocol for least-cost transparent frame routing in multi-hop networks with arbitrary topologies and link technologies, using link-state routing and a hop count. The TRILL base protocol standard supports the labeling of TRILL Data packets with up to 4K IDs. However, there are applications that require a larger number of labels providing configurable isolation of data. This document updates RFC 6325 by specifying optional extensions to the TRILL base protocol to safely accomplish this. These extensions, called finegrained labeling, are primarily intended for use in large data centers, that is, those with more than 4K users requiring configurable data isolation from each other.
منابع مشابه
Transparent Interconnection of Lots of Links (TRILL): End Station Address Distribution Information (ESADI) Protocol
The IETF TRILL (Transparent Interconnection of Lots of Links) protocol provides least-cost pair-wise data forwarding without configuration in multi-hop networks with arbitrary topologies and link technologies. TRILL supports multipathing of both unicast and multicast traffic. Devices that implement the TRILL protocol are called TRILL switches or RBridges (Routing Bridges). ESADI (End Station Ad...
متن کاملInternet Engineering Task Force (ietf) Problem Statement and Goals for Active-active Connection at the Transparent Interconnection of Lots of Links (trill) Edge
The IETF TRILL (Transparent Interconnection of Lots of Links) protocol provides support for flow-level multipathing with rapid failover for both unicast and multi-destination traffic in networks with arbitrary topology. Active-active connection at the TRILL edge is the extension of these characteristics to end stations that are multiply connected to a TRILL campus. This informational document d...
متن کاملProblem Statement and Goals for Active-Active Connection at the Transparent Interconnection of Lots of Links (TRILL) Edge
The IETF TRILL (Transparent Interconnection of Lots of Links) protocol provides support for flow-level multipathing with rapid failover for both unicast and multi-destination traffic in networks with arbitrary topology. Active-active connection at the TRILL edge is the extension of these characteristics to end stations that are multiply connected to a TRILL campus. This informational document d...
متن کاملTransparent Interconnection of Lots of Links (TRILL): Fault Management
This document specifies Transparent Interconnection of Lots of Links (TRILL) Operations, Administration, and Maintenance (OAM) fault management. Methods in this document follow the CFM (Connectivity Fault Management) framework defined in IEEE 802.1 and reuse OAM tools where possible. Additional messages and TLVs are defined for TRILLspecific applications or for cases where a different set of in...
متن کاملTransparent Interconnection of Lots of Links (TRILL): Adjacency
The IETF Transparent Interconnection of Lots of Links (TRILL) protocol supports arbitrary link technologies between TRILL switches, including point-to-point links and multi-access Local Area Network (LAN) links that can have multiple TRILL switches and end stations attached. TRILL uses Intermediate System to Intermediate System (IS-IS) routing. This document specifies the establishment, reporti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- RFC
دوره 7172 شماره
صفحات -
تاریخ انتشار 2014