High Energy Sputtering from Cleaned Metal Foils *
نویسنده
چکیده
Positive and negative secondary ions desorbed from metal foils by bombardment with 252Cf fission products have been investigated by time-of-flight mass spectroscopy. The measurements were performed under UHV conditions using metal foils of Cu, Ni and Al cleaned by Ar-ion etching. Spectra were taken with cleaned surfaces and also under the exposure of H2 , 0 2 , N2 , CO, C2H4 , C2H6 and C3H70H up to several 100 L. The yields of metal ions from clean metal surfaces are in agreement with Sigmund' theory.
منابع مشابه
Wetting and self-cleaning properties of artificial superhydrophobic surfaces.
The wetting and the self-cleaning properties (the latter is often called the "Lotus-Effect") of three types of superhydrophobic surfaces have been investigated: silicon wafer specimens with different regular arrays of spikes hydrophobized by chemical treatment, replicates of water-repellent leaves of plants, and commercially available metal foils which were additionally hydrophobized by means o...
متن کاملMagnetron-Sputtered, Biodegradable FeMn Foils: The Influence of Manganese Content on Microstructure, Mechanical, Corrosion, and Magnetic Properties.
FeMn alloys show a great potential for the use as a biodegradable material for medical vascular implants. To optimize the material properties, with respect to the intended application, new fabrication methods also have to be investigated. In this work different Fe-FeMn32 multilayer films were deposited by magnetron sputtering. The deposition was done on a substrate structured by UV lithography....
متن کاملIonization of Sputtered Atoms - Progress Toward a Quantitative Technique
The combination of RIMS and ion sputtering has been heralded as the ideal means of quantitatively probing the surface of a solid. While several laboratories have demonstrated the extreme sensitivity of combining RIMS with sputtering, less effort has been devoted to the question of accuracy. Using the SARISA instrument developed at Argonne National Laboratory, a number of well-characterized meta...
متن کاملEffect of microtextured surface topography on the wetting behavior of eutectic gallium-indium alloys.
Liquid-embedded elastomer electronics have recently attracted much attention as key elements of highly deformable and "soft" electromechanical systems. Many of these fluid-elastomer composites utilize liquid metal alloys because of their high conductivities and inherent compliance. Understanding how these alloys interface with surfaces of various composition and texture is critical to the devel...
متن کاملDeuterium Treatment Effects on Lithium and Tin-lithium Sputtering in Solid and Liquid Phase
The absolute sputtering yields of D+, He+and r.r on solid, liquid lithium and liquid tinlithium have been successfully measured and modeled at low energies in the Ion-surface InterAction Experiment (IIAX). IIAX is used in this work to determine the dependence of Li erosion on the use of hydrogen isotopes to treat liquid metal surfaces of both liquid lithium and liquid tin-lithium. Earlier data ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013