A 125-170 GHz wideband high-power amplifier using 0.5-µm InP DHBT
نویسندگان
چکیده
In this paper, a D-band power amplifier (PA) based on 0.5-μm InP DHBT is presented. Wilkinson combiners with broadband stepped-impedance matching are used, and the eight-way PA is designed for wideband power performance. As input power is fixed at 3 dBm, the PA exhibits a saturated output power of 16.8 dBm and 7.9% PAE at 150 GHz with >45-GHz 3-dB power bandwidth from 125 GHz to 170 GHz. Meanwhile the 1-dB gain compression output power is 15.9 dBm at 150 GHz. The >45-GHz 3-dB power bandwidth means a great flatness of power gain which is outstanding in reported D-band PAs to our best knowledge.
منابع مشابه
A high conversion-gain Q-band InP DHBT subharmonic mixer using LO frequency doubler
The paper presents analysis and design of a -band subharmonic mixer (SHM) with high conversion gain. The SHM consists of a local oscillator (LO) frequency doubler, RF pre-amplifier, and single-ended mixer. The SHM has been fabricated in a high-speed InP double heterojunction bipolar transistor (DHBT) technology using coplanar waveguide structures. To the best of our knowledge, this is the first...
متن کاملA New Ultra-Wideband Low Noise Amplifier With Continuous Gain Control
This paper presents a new variable gain low noise amplifier (VG-LNA) for ultra-wideband (UWB) applications. The proposed VG-LNA uses a common-source (CS) with a shunt-shunt active feedback as an input stage to realize input matching and partial noise cancelling. An output stage consists of a gain-boosted CS cascode and a gain control circuit that moves the high resonant frequency to higher freq...
متن کاملA 28-36 GHz Optimized CMOS Distributed Doherty Power Amplifier with A New Wideband Power Divider Structure
Background and Objectives: In this paper, a new design strategy was proposed in order to enhance bandwidth and efficiency of power amplifier. Methods: To realize the introduced design strategy, a power amplifier was designed using TSMC CMOS 0.18um technology for operating in the Ka band, i.e. the frequency range of 26.5-40GHz. To design the power amplifier, first a power divider (PD) with a ver...
متن کاملA LATERALLY ETCHED COLLECTOR InP/InGaAs(P) DHBT PROCESS FOR HIGH SPEED POWER APPLICATIONS
Abstract We present a selective laterally wet etched collector InP/InGaAs/InGaAsP double heterojunction bipolar transistor (DHBT) with a quaternary step graded base collector structure. This device shows a DC current gain of = 70 over a large collector current range, a breakdown voltage of BVCE0 = 10.5 V, and a maximal collector emitter voltage of more than 5.5 V at 105 A/cm2 collector current ...
متن کاملHigh current (100mA) InP/InGaAs/InP DHBTs with 330 GHz fmax
We report high fmax and high current InP/InGaAs/InP DHBT in transferred-substrate technology. The common base device with equivalent emitter size of 128 um exhibits fmax of 330 GHz at the current of 100 mA. The common emitter device with emitter area of 64 um shows fmax of 371 GHz when biased at 57 mA. The breakdown voltage of these DHBTs is up to 7 volts at low current density. All the devices...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Electronic Express
دوره 14 شماره
صفحات -
تاریخ انتشار 2017