Localisation d'une flotte de véhicules communicants par approche de type SLAM visuel décentralisé

The localization of a vehicle with the use of SLAM techniques (Simultaneous Localization And Mapping) has been extensively studied during the last 20 years. However, only a few approaches have tried to extend these algorithms to a fleet of vehicles despite the many potential applications. It is the objective of this thesis. First of all, a monocular SLAM for a single vehicle has been developed. This one proposes to pair an Extended Kalman Filter with a Cartesian representation for landmarks so as to produce accurate low density maps. Indeed, the extension of SLAM to several vehicles requires permanent communications inside the fleet. With only a few landmarks mapped, our approach scales nicely with the number of vehicles. Cheap sensors have been favored (a single camera and an odometer) in order to spread more easily the use of multi-vehicle applications. Correctives have been proposed in order to avoid the divergence problems induced by such a scheme. The experiments showed that our SLAM is able to furnish good localization results while being light and fast. The drift affecting every SLAM algorithm has also been studied. Its integration inside the SLAM process, thanks to a dedicated architecture and a dynamic model, allows to ensure consistency even without an estimation of it. Loop closures or the integration of geo-referenced information becomes straightforward. They naturally correct all the past positions while still maintaining consistency. In a multi-vehicle scenario, it is a key aspect as each vehicle drifts differently from one another. It is consequently important to take it into account. Our SLAM algorithm has then been extended to several vehicles. A generic structure has been used so as to allow any SLAM algorithm to replace our monocular SLAM. The multi-vehicle architecture avoids data incest (double-counting information) and handles network failures, be they communication breakdowns or latencies when receiving data. The static part of the drift model allows to take into account the fact that the initial positions of the different vehicles composing the fleet might be unknown. Consistency is thus permanently preserved. Our approach has been successfully tested using simulations and real experiments with various settings (row or column convoy with 2 or 3 vehicles) in a fully decentralized way.