Tailored surface birefringence by femtosecond laser assisted wet etching.

نویسندگان

  • Rokas Drevinskas
  • Mindaugas Gecevičius
  • Martynas Beresna
  • Yves Bellouard
  • Peter G Kazansky
چکیده

Surface texturing is demonstrated by the combination of wet etching and ultrafast laser nanostructuring of silica glass. Using potassium hydroxide (KOH) at room temperature as an etchant of laser modified glass, we show the polarization dependent linear increase in retardance reaching a threefold value within 25 hours. The dispersion control of birefringence by the etching procedure led to achromatic behaviour over the entire visible spectral range. The mechanism of enhanced KOH etching selectivity after femtosecond laser exposure is discussed and correlated to the formation of various laser-induced defects, such as silicon-rich oxygen deficiency and color centers.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nanoindentation and birefringence measurements on fused silica specimen exposed to low-energy femtosecond pulses.

Femtosecond laser pulses used in a regime below the ablation threshold have two noticeable effects on Fused Silica (a-SiO2): they locally increase the material refractive index and modify its HF etching selectivity. The nature of the structural changes induced by femtosecond laser pulses in fused silica is not fully understood. In this paper, we report on nanoindentation and birefringence measu...

متن کامل

Surface-enhanced Raman scattering microchip fabricated by femtosecond laser.

We report a surface-enhanced Raman scattering (SERS) microchip that is capable of measuring SERS signals of liquid samples with high sensitivity. The microdevice is an integration of a silicon-based SERS substrate, a multimode optical fiber (MMF), and a microchannel embedded in the photosensitive glass fabricated by the femtosecond laser followed by thermal treatment, wet etching, and annealing...

متن کامل

Fabrication and Optical Characterization of Silicon Nanostructure Arrays by Laser Interference Lithography and Metal-Assisted Chemical Etching

In this paper metal-assisted chemical etching has been applied to pattern porous silicon regions and silicon nanohole arrays in submicron period simply by using positive photoresist as a mask layer. In order to define silicon nanostructures, Metal-assisted chemical etching (MaCE) was carried out with silver catalyst. Provided solution (or materiel) in combination with laser interference lithogr...

متن کامل

Femtosecond laser fabrication of high reflectivity micromirrors

High-quality freestanding micromirrors consisting of 40 dielectric layers on silicon have been fabricated by ultrashort-pulse laser ablation in combination with laser-assisted wet chemical etching. Backside material removal enables direct access to both faces of the dielectric coating. The amplitude reflectance of the micromirrors has been determined by Fabry–Pérot interferometry; a finesse in ...

متن کامل

Nanorods on surface of GaN-based thin-film LEDs deposited by post-annealing after photo-assisted chemical etching

This study investigates the optoelectronic characteristics of gallium nitride (GaN)-based thin-film light-emitting diodes (TF-LEDs) that are formed by a two-step transfer process that involves wet etching and post-annealing. In the two-step transfer process, GaN LEDs were stripped from sapphire substrates by the laser lift-off (LLO) method using a KrF laser and then transferred onto ceramic sub...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics express

دوره 23 2  شماره 

صفحات  -

تاریخ انتشار 2015