Nonlinear Model-Based Control of Unstable Wells
نویسندگان
چکیده
This paper illustrates the potential of nonlinear model-based control applied for stabilization of unstable flow in oil wells. A simple empirical model is developed that describes the qualitative behavior of the downhole pressure during severe riser slugging. A nonlinear controller is designed by an integrator backstepping approach, and stabilization for open-loop unstable pressure setpoints is demonstrated. The proposed backstepping controller is shown in simulations to perform better than PI and PD controllers for low pressure setpoints, and is in addition easier to tune. Operation at a low pressure setpoint is desirable since it corresponds to a high production flow rate. The simulation results are presented to illustrate the effectiveness of proposed control scheme.
منابع مشابه
Fault-Tolerant Control of a Nonlinear Process with Input Constraints
A Fault-Tolerant Control (FTC) methodology has been presented for nonlinear processes being imposed by control input constraints. The proposed methodology uses a combination of Feedback Linearization and Model Predictive Control (FLMPC) schemes. The resulting constraints in the transformed process will be dependent on the actual evolving states, making their incorporation in the de...
متن کاملActive and reactive power control via currents of a rotor’s d and q components with nonlinear predictive control strategy in a doubly fed induction generator based on wind power system
Wind energy today, has attracted widespread interest from among a variety of sources of renewable energy in the world. Owing to the increasing demand for production of electrical energy for electricity networks by using wind power, it is essential that wind power plants are actively incorporated in the network’s performance using an appropriate control system. In general, these wind power p...
متن کاملActive and reactive power control via currents of a rotor’s d and q components with nonlinear predictive control strategy in a doubly fed induction generator based on wind power system
Wind energy today, has attracted widespread interest from among a variety of sources of renewable energy in the world. Owing to the increasing demand for production of electrical energy for electricity networks by using wind power, it is essential that wind power plants are actively incorporated in the network’s performance using an appropriate control system. In general, these wind power plant...
متن کاملControlling Nonlinear Processes, using Laguerre Functions Based Adaptive Model Predictive Control (AMPC) Algorithm
Laguerre function has many advantages such as good approximation capability for different systems, low computational complexity and the facility of on-line parameter identification. Therefore, it is widely adopted for complex industrial process control. In this work, Laguerre function based adaptive model predictive control algorithm (AMPC) was implemented to control continuous stirred tank rea...
متن کاملControl of Airborne Wind Energy Systems Based on Nonlinear Model Predictive Control & Moving Horizon Estimation
Among the several problems arising in the Airborne Wind Energy paradigm, an essential one is the control of the tethered airfoil trajectory during power generation. Tethered flight is a fast, strongly nonlinear, unstable and constrained process, motivating control approaches based on fast Non-linear Model Predictive Control. In this paper, a computationally efficient model is proposed, based on...
متن کامل