Mixing: Finding the (small) Crack in the Standard Model
نویسنده
چکیده
We review results from searches for mixing and CP violation in the D 0-D 0 system. No evidence for mixing or CP violation is found, and limits are set for the mixing parameters x, y, x ′ , y ′ , and several CP-violating parameters.
منابع مشابه
Crack Influences on the Static and Dynamic Characteristic of a Micro-Beam Subjected to Electro Statically Loading
In the present work the pull-in voltage of a micro cracked cantilever beam subjected to nonlinear electrostatic pressure was studied. Two mathematical models were employed for modeling the problem: a lumped mass model and a classical beam model. The effect of crack in the lumped mass model is the reduction of the effective stiffness of the beam and in the beam model; the crack is modeled as a m...
متن کاملSegregation Behaviour of Particles in Gas Solid Fluidized Beds at Elevated Pressure
A comprehensive mathematical model based on the discrete particle model and computational fluid dynamics was utilized to investigate mixing and segregation of particles in fluidized beds at high pressure. To quantify the extent of mixing in the bed, the Lacey mixing index was used. Simulations were carried out with different mass fractions of small particles at various pressures ranging from 1 ...
متن کاملAn investigation into finding the optimum combination for dental restorations
The aim of the study was to find the optimum combination of materials and thicknesses to provide a tough, damage resistant multi-layer system with numerical methods to restore the damaged teeth. Extended Finite Element Method (XFEM) was used to assess the critical loads for the onset of damage modes such as radial cracks and plastic deformation in dental prostheses, which consist of a brittle o...
متن کاملتعیین تئوری - تجربی پارامترهای ترک غیرخطی در تیر ترک‌دار تحت ارتعاشات غیرخطی کم دامنه
In the vibration of a cracked structure with small amplitude oscillations, the crack necessarily is not fully open or fully closed. Therefore, in order to provide a realistic model for the crack, one should relate the stiffness and damping at the crack location to the amount of the opening of the crack. In this study, a continuous model for vibration of a beam with a fatigue crack under low amp...
متن کاملCalculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress
In this paper, the problem of calculating the stress intensity factor (SIF) for an orthotropic thick-walled cylinder with a small radial crack subject to internal pressure is considered. The crack is assumed to be an edge crack on the external radius of the cylinder. The stress intensity factor is calculated by superposition of an uncracked cylinder with uniform stress distribution and a cylind...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006