A simple model for laser drilling
نویسندگان
چکیده
A simple mathematical model of laser drilling is proposed. Assuming axi-symmetry of the process around the axis of the laser beam, a one-dimensional formulation is obtained after cross-sectional averaging. The novelty of the approach relies on the fact that even after dimension reduction, the shape of the hole can still be described. The model is derived, implemented and validated for drilling using lasers with intensities in the GW/cm2 range and microsecond pulses.
منابع مشابه
New Experimental Approach to Study Laser Matter Interaction during Drilling in Percussion Regime
Laser drilling is a well-established process in aerospace industry. However quality and geometry of holes do not get under control in an absolute way. Moreover, drilling understanding is complicated due to the number of parameters and physical phenomena. Laser and matter have some own parameters which are not constant with temperature, and so could not be fitted. In this paper, we describe the ...
متن کاملModelling of heat transfer in waterjet guided laser drilling of silicon
Waterjet guided laser processing is an internationally patented technique based on guiding a laser beam inside a thin, high-speed waterjet. The process combines the advantages of laser processing with those of waterjet cutting. It is very suitable in processing thin and heat-sensitive materials with a high degree of precision required. A model and simulation method for waterjet guided laser dri...
متن کاملNumerical simulation of process dynamics during laser beam drilling with short pulses
In the last years, laser beam drilling became increasingly important for many technical applications as it allows the contactless production of high quality drill holes. So far, mainly short laser pulses are of industrial relevance, as they offer a good compromise between precision and efficiency and combine high ablation efficiency with low thermal damage of the workpiece. Laser beam drilling ...
متن کاملDevelopment of Mathematical Model for Controlling the Drilling Parameters with a Screw Downhole Motor
Article presents results of study on possibility of increasing the efficiency of drilling directional straight sections of wells using screw downhole motors (SDM) with a combined method of drilling with rotation of drilling string (DS). Goal is to ensure steady-state operation of SDM with simultaneous rotation of DS by reducing the amplitude of oscillations with adjusting the parameters of dril...
متن کاملDrilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly
The study of rotary steering drilling technology is currently one of the hot topics in the drilling engineering field. It requires accurate well trajectory control instructions when rotary steerable tools are applied to achieve the well trajectory control goal. A drilling trajectory prediction model will benefit this progress. According to the continuous beam theory, a mechanical model of push-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Mathematics and Computers in Simulation
دوره 81 شماره
صفحات -
تاریخ انتشار 2011