Study and Performance Evaluation of Thermal Barrier Coatings (TBCs) Using Infrared Thermography
نویسندگان
چکیده
Thermal barrier coatings (TBCs) are used in gas turbine engines to protect engine hot-section components in the harsh combustion environments, and extend component lifetimes. Infrared Thermography method has been selected for obtaining thermal images and studying the TBCs of Alumina, Zirconia and Alumina+Titanium oxide coated on the base plate of Titanium, by measuring the back wall temperatures. The results were analyzed in terms of different coating materials and of varying thicknesses. The salient features of Infrared Thermography for the measurement of temperature of TBCs have been brought out.
منابع مشابه
Active Infrared Thermography for Non Destructive Evaluation of Defects in Wear Resistance and Thermal Barrier Coatings
In fossil fuel power generation plants, steam generation tubes and turbine blades are critical for overall performance of plant. The materials are subjected to bear heavy wear and temperature during operation. The manufacturer has an option of using high wear resistant and high temperature materials which are costlier or using cheaper materials with ceramic coatings over it. The coatings expose...
متن کاملComparative Study of Plasma Sprayed Yittria and Ceria Stabilized Zirconia Properties
Thermal Barrier Coatings are subjected to spallation and destabilization due to hot corrosion.Recently, Ceria Stabilized Zirconia (CSZ)-based TBCs have been intensively investigated for the YSZreplacement because CSZ has a much lower thermal conductivity and a higher expected thermalexpansion coefficient than those of YSZ. In this research, Yttria stabilized zirconia (YSZ) andceria stabilized z...
متن کاملThermal Conductivity and Viscoelastic Properties of UV-curable Urethane Acrylate Reinforced with Modified Al2O3 Nanoparticles
In this study, UV-curable urethane acrylate UA synthesized and then characterized by FTIR and HNMR. For better dispersion of nanoparticles in polymeric matrix, nano Al2O3 was modified by silane coupling agent and then its nanocomposites were prepared. The characteristics of synthesized nanocomposites were analyzed by TGA, DMA and infrared thermography. The results signify that adding nano Al2O3...
متن کاملAN INVESTIGATION ON EFFECT OF BOND COAT REPLACEMENT ON HOT CORROSION PROPERTIES OF THERMAL BARRIER COATINGS
In the present study NiCrAlY bond coating layer was produced by electroplating against common atmospheric plasma spraying (APS). Both types of the bond coats were applied on IN738LC base metal then, the YSZ (ZrO2-8% Y2O3) thermal barrier top layer was coated by atmospheric plasma spray technique. Hot corrosion is one of the main destructive factors in thermal barrier coatings (TBCs) which come ...
متن کاملAir Plasma Sprayed Bond Coat Oxidation Behavior and its Resistance to Isothermal and Thermal Shock Loading
An experimental investigation was conducted to find the effect of spraying method of coating of Thermal Barrier Coatings (TBCs) on their oxidation behaviour and resistance to various thermal loading. Isothermal and thermal shock tests were performed in order to study oxidation behaviour of air plasma sprayed Bond Coat (BC) and assess its effect on TBCs lifetime under the stated loadings. Specim...
متن کامل