Effect of Ceramic Content on the Compression Properties of TiB2-Ti2AlC/TiAl Composites
نویسندگان
چکیده
In situ synthesized TiB2-reinforced TiAl composites usually possess high strength. However, it is very expensive to use B powder to synthesize TiB2 particles. Moreover, the strength enhancement of TiB2/TiAl composite is generally at the cost of plasticity. In this study, in situ dual reinforcement TiB2-Ti2AlC/TiAl composites were fabricated by using B4C powder as the B and C source, which greatly reduces the potential production cost. The 6 vol. % TiB2-Ti2AlC/TiAl composite fabricated by using the Ti-Al-B4C system shows greatly improved compressive properties, i.e., 316 MPa and 234 MPa higher than those of TiAl alloy and with no sacrifice in plasticity.
منابع مشابه
Effect of Mn, Fe and Co on the compression strength and ductility of in situ nano-sized TiB2/TiAl composites.
The element of Fe can enhance the strength of TiB2/TiAl composite, but it is detrimental to the ductility of the composite due to the existence of large bulk TiB2 phase at grain boundary. The element of Mn is beneficial to the ductility of TiB2/TiAl composite, of which the fracture strain increases from 15.9 to 17.9 % with the addition of 2 at.% Mn. The element of Co can improve the strength an...
متن کاملPRODUCTION OF TiAl/Al2O3 AND TiAl/Ti2AlC/Al2O3 COMPOSITES BY EXPLOSION SYNTHESIS
Thermal explosion mode of combustion synthesis was used to fabricate TiAl-Al2O3 and TiAl-Ti2AlC-Al2O3 composites from elemental powder mixtures of TiO2, Al and C and characterized by XRD and Scanning Electron Microscopy (SEM) coupled with Energy-Dispersive Spectroscopy (EDS). The experimental results showed that thermite reaction of Al with TiO2 caused TiAl-Al2O3 composite formation. By adding ...
متن کاملFabrication of TiCx-TiB2/Al Composites for Application as a Heat Sink
Metal matrix composites reinforced with ceramic particles have become the most attractive material in the research and development of new materials for thermal management applications. In this work, 40-60 vol. % TiCx-TiB₂/Al composites were successfully fabricated by the method of combustion synthesis and hot press consolidation in an Al-Ti-B₄C system. The effect of the TiCx-TiB₂ content on the...
متن کاملHigh-Performance Metal/Carbide Composites with Far-From-Equilibrium Compositions and Controlled Microstructures
The prospect of extending existing metal-ceramic composites to those with the compositions that are far from thermodynamic equilibrium is examined. A current and pressure-assisted, rapid infiltration is proposed to fabricate composites, consisting of reactive metallic and ceramic phases with controlled microstructure and tunable properties. An aluminum (Al) alloy/Ti2AlC composite is selected as...
متن کاملEffect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS
In this paper TiB2-TiC/Ni cermet with various Ni (20, 40 and 60 wt %) content were synthesized by mechanically activated self-propagating synthesis (MASHS) and effect of the addition of Ni on synthesis parameters and microstructure of synthesized samples were investigated. First raw materials (B4C, Ti and Ni) milled in Ar atmosphere. Then milling powders analyzed by XRD. In next step powders sy...
متن کامل